lang = { "eng" : "English", "rus" : "Русский", "ukr" : "Українська", "tur" : "Türkçe", "fra" : "Français", "ara" : "العربية", "fas" : "فارسی", "auth" : "y", "dup" : "This value is already used", "bad_auth" : "Authentication failed!", "loginRememberMe" : "Remember me", "notAvailTitle" : "Device is not available!", "notAvailDesc" : "Check availability of the device and reload the page!", "settings" : "Settings", "devices" : "Devices", "menu_sw_home" : "Home", "menu_storInfo" : "Information", "leavePageMes" : "You have unsaved changes. Do you want to leave the page?", "ghz" : "GHz", "menu_wizards" : "Wizards", "storInfoUnmountAll" : "Unmount storage", "airWifiIcon2GHz" : "Wi-Fi 2.4 GHz", "airWifiIcon5GHz" : "Wi-Fi 5 GHz", "airVendor" : "Vendor", "airSupport" : "Support", "airAuth" : "Authorization", "airLogin" : "Login", "airPasswd" : "Password", "airChecking" : "Checking...", "airDeny" : "Access denied!", "airEnter" : "Enter", "airWarning" : "Warning", "airNotAvail" : "Device is not available", "airMonitoring" : "Monitoring", "airMonitoringDesc" : "Viewing activity and fast edit", "airSettings" : "Settings", "airSettingsDesc" : "Editing device settings", "airSearch" : "Search", "airSearchDesc" : "Search by keyword settings", "airInternet" : "Internet", "airAddNew" : "Add new...", "airFirewall" : "Firewall", "airControl" : "Control", "airMenuReboot" : "Reboot device", "airMenuBackup" : "Get config backup", "airMenuFactory" : "Reset to factory", "airMenuFirmware" : "Update firmware...", "airMenuLogout" : "Logout", "airWiFiFilter" : "Wi-Fi Filter", "airWireless" : "Wireless", "airTrimDynamic" : "Dynamic Clients", "airTrimLocal" : "Local Network", "airTrimStatic" : "Static Clients", "airMACFilter" : "MAC Filter", "airVirtServ" : "Virtual
Servers", "airMsgLoading" : "Loading...", "airIdle" : "Idle...", "airIdleDesc" : "Settings page is idle", "airBtnApply" : "Apply", "airBtnCancel" : "Cancel", "airPasswdDesc" : "Please, change default password", "airReset" : "Reset", "airResetDesc" : "Please, reset device to factory configuration", "airReboot" : "Reboot", "airRebootDesc" : "Please, reboot device to apply changes", "airSave" : "Save", "airSaveDesc" : "Device configuration was changed", "airWiFi" : "Сonfigure WiFi", "airWiFiDesc" : "Wireless network is not secure", "airWiFiDesc2.4G" : "Wireless network is not secure (2.4GHz)", "airWiFiDesc5G" : "Wireless network is not secure (5GHz)", "airWiFiDesc2.4G5G" : "Wireless network is not secure (2.4GHz and 5GHz)", "airLTE" : "Change subnet.", "airLTEDesc" : "LAN subnet coincides with modem subnet", "airLTEDesc2" : "Need to change the LAN settings", "airTipDHCPD" : "Enable/Disable DHCP Server", "airTipWiFiHide" : "Hide Access Point", "airTipWiFiPasswd" : "Enable/Disable password protection", "airWiFiNoPasswd" : "No password", "airWiFiRadius" : "Radius", "airClass" : "Class", "airNetwork" : "Network", "airNetmask" : "Netmask", "airHostmin" : "Hostmin", "airHostmax" : "Hostmax", "airWildcard" : "Wildcard", "airBroadcast" : "Broadcast", "airHosts" : "Hosts", "airDeny2" : "Deny", "airAllow" : "Allow", "airUnbindIP" : "Unbind IP from MAC", "airBindIP" : "Bind IP to MAC", "airUnknown" : "Unknown", "airAddToWifi" : "Ban by MAC to Wi-Fi filter", "airBanByMAC" : "Ban by MAC", "airDisconnect" : "Disconnect", "airCloneMAC" : "Clone MAC", "airBanCount" : "Clients
Banned", "airPorts" : "Ports", "airRedirected" : "Redirected", "airUnknownError" : "Unknown error", "airServNotAvail" : "Server not available", "airPeerFailed" : "Peer negotiation failed", "airPeerNotResp" : "Peer not responding", "airAuthFail" : "Authentication failed", "airDisconnected" : "Disconnected", "airNotCable" : "Cable is not connected", "airRebooting" : "Rebooting...", "airReseting" : "Reseting...", "airUmount" : "Unmount storage", "airEdit" : "Edit", "airFWUpgrade" : "Upgrade firmware", "airBtnBrowse" : "Browse", "airFWInfo" : "Download a new version of the firmware from www.dlink.ru and click the Browse button to locate the new firmware file.", "airWinClose" : "Close", "airFWUploading" : "Uploading", "airUpdating" : "Updating...", "airRecovery" : "Restore configuration", "airRCInfo" : "When restoring the configuration, сlick the Browse button to select a previously saved configuration file located on your PC.", "airMenuRestore" : "Restore config...", "airRestoring" : "Restoring...", "airNTP" : "Local time", "airNTPInfo" : "The device’s time does not match the time of your PC.", "airNTPEnable" : "Enable NTP", "airURLs" : "URLs", "airBanned" : "Banned", "airAllowed" : "Allowed", "airAllIP" : "All IP", "airAllPorts" : "All ports", "airRules" : "Rules", "airActivated" : "activated", "airPortTip" : "Enable/Disable IPtv", "airClients" : "Clients", "airAddCli" : "Add client", "airStatCli" : "Static client", "airIPAddr" : "IP-address", "airMACAddr" : "MAC-address", "airSIM" : "SIM", "airSIMDesc" : "To unlock the SIM card, please enter the", "airMatches" : "matches", "airYou" : "You", "airDenyAccess" : "Deny access", "airWiFiScanner" : "Wi-Fi Scanner", "airWiFiScannerDesc" : "Viewing wireless hotspots", "security" : "Security", "airWSignal" : "Signal", "airWMode" : "Mode", "airWOpen" : "Open", "airWEnable1" : "To use the scanner,", "airWEnable2" : "first turn the Wi-Fi module on", "airWUnsupported" : "Sorry, device not supported", "airApcliMode" : "Client mode", "airApcliDesc" : "To switch Wi-Fi to the client mode, click an available hotspot on the diagram.", "airApcliDisconnect" : "Disconnect", "airHelpme" : "Help me", "airHelpBack" : "Back to settings", "airTipUfilter" : "Enable/Disable URL-filter", "airTipWfilter" : "Enable/Disable Wi-Fi filter", "airTipWiFi" : "Enable/Disable Wireless", "airTipApcli" : "Disable client mode", "airHelp" : "Help", "airHelpDesc" : "Learn more about the new web-based interface", "airBtnStart" : "Start", "airBtnPrev" : "« Previous", "airBtnNext" : "Next »", "airNotConn" : "Please, create a connection", "airNotWiFiConn" : "Wi-Fi connection is not connected", "airAndPIN" : "and new PIN", "airLang" : "Language", "airRedirectIp" : "If there was no automatic transition, change your local settings and click the link below", "airRedirectIpConf" : "The local IP address of the device was changed. Go to the new address after reboot?", "airVoip" : "VoIP", "airVoipLine1" : "Line 1", "airVoipLine2" : "Line 2", "airVoipSettings" : "Skip to VoIP settings", "dcc.confirm.fw_info_for_user" : "fw_info_for_user", "maybe_lang" : "Maybe your language is", "S" : "s", "M" : "m", "H" : "h", "D" : "d", "b" : "bit", "Kb" : "Kbit", "Mb" : "Mbit", "Gb" : "Gbit", "B" : "Byte", "KB" : "KByte", "MB" : "MByte", "GB" : "GByte", "passwChangePass" : "Change password", "passwEmptyPass" : "Empty password", "passwWrongPass" : "Password contains invalid characters", "passwConfirmMismatch" : "Confirmation and password are different!", "mtnet_passError" : "The password must contain only English letters and numbers!", "view_full_version" : "Full version", "view_mobile_version" : "Mobile version", "button_notify" : "Notifications", "menu_notify" : "Notifications", "menu_statDhcp" : "DHCP", "statDhcpHost" : "Hostname", "statDhcpExpires" : "Expires", "statDhcpExpired" : "Expired", "help_menu_statDhcp" : "The DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).", "help_ex_menu_statDhcp" : "The DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).", "menu_dmz" : "DMZ", "dmzLabel" : "Demilitarized zone settings", "menu_status" : "Status", "use_connection" : "Use connection", "menu_firewall" : "Firewall", "manual" : "Manual", "selected" : "Selected", "menuIPFilter" : "IP filters", "ipfltLabel" : "IP filters configuration", "ipfltEditSect" : "IP filter rule editing", "ipfltGenSect" : "General", "ipfltAction" : "Action", "ipfltSource" : "Source", "ipfltPort" : "Port", "ipfltSectIP" : "IP Addresses", "ipfltSectIPDesc" : "For entering IP address type 32 as subnet bit-mask (field after \"/\")", "ipfltSectIPDesc2" : "You can specify a range of IP addresses, a single IP address, or a subnet IP address (for example, 10.10.10.10/24).", "ipfltSectPort" : "Ports", "ipfltSectPortDesc" : "You can specify either a port or port range, and several: 80,8080 or 400:500", "ipfltSectPortDesc2" : "You can specify one port, several ports separated by a comma (for example, 80,90), or a range of ports separated by a colon (for example, 80:90).", "ipfltIPRange" : "IP addresses range", "ipfltIPRange2" : "Use IP addresses range", "ipfltSourceBeg" : "Source (first)", "ipfltSourceEnd" : "Source (last)", "ipfltDestBeg" : "Destination (first)", "ipfltDestEnd" : "Destination (last)", "ipfltWrongRange" : "Wrong range of addresses", "ipfltWrongPortOrRange" : "Wrong port or port range", "ipfltWrongPortOrRange2" : "Ports of the source and destination should be specified in the same format", "ipfltWrongPortOrRange3" : "The port should be a number in the range from 1 to 65535", "ipfltExistRuleMessage" : "Such rule name is already exist", "portsrc" : "Source port", "portdst" : "Destination port", "ipsrc" : "Source IP address", "ipdst" : "Destination IP address", "ipfltWrongStartIP" : "You cannot use a subnet address as the beginning of the range", "vserversMenu" : "Virtual servers", "vserversLabel" : "Virtual servers list", "vserversDescText" : "You can add, edit and delete virtual servers here", "vserversEditSect" : "Virtual server settings", "vserversIPDst" : "Private IP", "vserversPortDst" : "Private port", "vserversPortFw" : "Public port", "vserversPortDstB" : "Private port (begin)", "vserversPortFwB" : "Public port (begin)", "vserversPortDstE" : "Private port (end)", "vserversPortFwE" : "Public port (end)", "vserversIface" : "Interface", "vserversName" : "Name", "vserversProtocol" : "Protocol", "vserversTemplate" : "Template", "vserversWrongPortFw" : "Wrong public port!", "vserversWrongPortDst" : "Wrong private port!", "vserversCreateWan" : "Please, create WAN-connection at first", "vserversRemoteIp" : "Remote IP", "vserversClear" : "Do you really want to delete all rules?", "menu_stat" : "Network statistics", "menu_net" : "Net", "DNS" : "Name servers", "add" : "Add", "raccessIpList" : "Known IP addresses", "raccessIpListSel" : "Select IP address", "menu_rmtAccess" : "Remote access to device", "rmtAccessLabel" : "Remote access configuration", "rmtAccessEditSect" : "Remote access rule editing", "rmtAccessPortS" : "Public port", "menu_ddns" : "DDNS", "ddnsLabel" : "DDNS client configuration", "ddnsEditSect" : "DDNS client editing", "ddnsService" : "DDNS Service", "ddnsHost" : "Host name", "ddnsUserPass" : "User password", "ddnsUserName" : "User name", "ddnsPeriod" : "Update period (min.)", "ddnsCantAdd" : "You can not add more than one DDNS service!", "ddnsCreateWan" : "Please, create WAN-connection at first", "ddnsWrongHost" : "Wrong host name or IP address!", "ddnsWrongUsrName" : "Wrong user name!", "ddnsWrongPass" : "Wrong password!", "menu_ntp" : "System time", "ntpTz" : "Timezone", "ntpServers" : "NTP servers", "ntpTzMinus12" : "(GMT -12 h.) Kwajalein, Eniwetok", "ntpTzMinus11" : "(GMT -11 h.) Midway, Samoa", "ntpTzMinus10" : "(GMT -10 h.) Hawaii", "ntpTzMinus9" : "(GMT -9 h.) Alaska", "ntpTzMinus8" : "(GMT -8 h.) Pacific Time Zone (Mexico, Nevada)", "ntpTzMinus7" : "(GMT -7 h.) Mountain Time Zone (Saskatchewan, Sonora)", "ntpTzMinus6" : "(GMT -6 h.) North American Central Time Zone (Costa Rica, Ecuador)", "ntpTzMinus5" : "(GMT -5 h.) North American Eastern Time Zone (Ontario, Ecuador)", "ntpTzMinus4" : "(GMT -4 h.) Atlantic Time Zone (Labrador, Dominica)", "ntpTzMinus3" : "(GMT -3 h.) Antarctica, Brazil, French Guiana", "ntpTzMinus2" : "(GMT -2 h.) South Georgia and the South Sandwich Islands", "ntpTzMinus1" : "(GMT -1 h.) Greenland, Portugal, Cape Verde", "ntpTzMinus430" : "(GMT -4:30 час.) Venezuela, Karakas", "ntpTzMinus330" : "(GMT -3:30 час.) Labrador, Newfoundland", "ntpTz330" : "(GMT +3:30 час.) Iran Standard Time", "ntpTz430" : "(GMT +4:30 час.) Afghanistan", "ntpTz530" : "(GMT +5:30 час.) India, Sri Lanka", "ntpTz545" : "(GMT +5:45 час.) Nepal", "ntpTz630" : "(GMT +6:30 час.) Cocos Islands, Myanmar", "ntpTz930" : "(GMT +9:30 час.) Australia (Northern Territory)", "ntpTz0" : "(GMT) Coordinated Universal Time (Dublin, London, Lisbon)", "ntpTz1" : "(GMT +1 h.) Albania, Austria, Vatican City", "ntpTz2" : "(GMT +2 h.) Cairo, Istanbul, Johannesburg, Alexandria, Israel", "ntpTz3" : "(GMT +3 h.) Baghdad, Khartoum", "ntpTz4" : "(GMT +4 h.) Moscow, Saint Petersburg, Baku, Samara, Tbilisi, Yerevan", "ntpTz5" : "(GMT +5 h.) Karachi, Lahore, Faisalabad, Rawalpindi", "ntpTz6" : "(GMT +6 h.) Yekaterinburg, Dhaka, Chittagong, Novosibirsk, Khulna", "ntpTz7" : "(GMT +7 h.) Omsk, Cambodia, Indonesia", "ntpTz8" : "(GMT +8 h.) Krasnoyarsk, Australia, Brunei, Hong Kong", "ntpTz9" : "(GMT +9 h.) Irkutsk, East Timor, Japan, North Korea", "ntpTz10" : "(GMT +10 h.) Yakutsk, Guam, Vladivostok, Khabarovsk Krai", "ntpTz11" : "(GMT +11 h.) Vladivostok, New Caledonia, Solomon Islands, Vanuatu", "ntpTz12" : "(GMT +12 h.) Magadan, Petropavlovsk-Kamchatski, Fiji, Nauru, Tuvalu", "ntpAddressEmpty" : "Empty \"NTP servers\" list!", "ntpAddressWrong" : "Wrong NTP server domain name in line:", "ntpDetectTZ" : "Determine timezone", "ntpMode" : "Mode", "ntpModeAuto" : "NTP", "ntpModeManual" : "Manual", "ntpMonth1" : "January", "ntpMonth2" : "February", "ntpMonth3" : "March", "ntpMonth4" : "April", "ntpMonth5" : "May", "ntpMonth6" : "June", "ntpMonth7" : "July", "ntpMonth8" : "August", "ntpMonth9" : "September", "ntpMonth10" : "October", "ntpMonth11" : "November", "ntpMonth12" : "December", "ntpMonth" : "Month", "ntpDay" : "Day", "ntpYear" : "Year", "ntpHour" : "Hour", "ntpMinute" : "Minutes", "ntpUseDhcp" : "Get NTP server addresses using DHCP", "menu_dns" : "DNS", "menu_dns_v6" : "DNS (IPv6)", "dnsLabel" : "DNS settings", "manual" : "Manual", "typeproto" : "Protocol type", "dnsDefRoute" : "Default route", "dnsServers" : "Name servers", "dnsAddressEmpty" : "Empty DNS servers IP address list!", "dnsAddressWrong" : "Wrong DNS server ip address in line:", "menu_routing" : "Routing", "routingLabel" : "Routing configuration", "routingDescText" : "You can add, edit and delete routes here", "routingInWizardDescText" : "Here you can add IP addresses of your ISP’s local resources.
Click \"Add\" button to add resource. Click mouse right button on the table header to add, delete, or edit addresses.
", "routingEditSect" : "Route editing", "routingAlreadyExists" : "This route already exists", "routingAlreadyExistsSave" : "Some routes are repeated!", "routingNetDest" : "Destination network", "routingNetDest" : "Destination network", "routingNetDestMask" : "Destination netmask", "routingGateway" : "Gateway", "routingViaIface" : "Via Interface", "routingAvail" : "Accessibility", "save_config_success" : "Configuration saved successfully", "save_and_reboot_success" : "Configuration saved successfully.\nPlease wait for reboot.", "resetconfig" : "Factory configuration was appled.", "resetconfigAlarm" : "Factory configuration will be applied through", "resetconfigContinue" : "continue?", "resetconfig" : "Factory configuration was appled.", "resetconfigAlarm" : "Factory configuration will be applied through", "resetconfigContinue" : "continue?", "menu_macfilter" : "MAC filter", "macfLabel" : "MAC filter configuration", "macfDescText" : "You can add, edit and delete addresses here", "macfEditSect" : "MAC address editing", "macfAddrTab" : "MAC addresses", "macfAccept" : "Allow", "macfDrop" : "Deny", "menu_statWan" : "WAN status", "statWanType" : "Type", "statWanCategory" : "Category", "statWanStatus" : "Status", "statWanDown" : "down", "statWanUp" : "up", "disable" : "Disabled", "not_appointed" : "not appointed", "switch_wifi" : "Enable/Disable Wi-Fi", "menu_wifi" : "Wi-Fi", "wifiPSKKeyWrong" : "WPA Pre-Shared Key should be between 8 and 63 ASCII characters.", "wifiWEPKeyWrong" : "Encryption key should contain 5 or 13 characters. Empty key is not allowed!", "wifiWEPKeyWrongHEX" : "Encryption key should contain HEX numbers!", "wifiWEPKeyWrongHEXSize" : "Encryption key should contain 5 or 13 characters. Empty key is not allowed!", "securityWEPKeyLength" : "WEP key length", "wifiWEPKeyWrong64" : "Key length must be 5 characters. Empty key is not allowed!", "wifiWEPKeyWrongHEXSize64" : "Key length must be 10 characters. Empty key is not allowed!", "wifiWEPKeyWrong128" : "Key length must be 13 characters. Empty key is not allowed!", "wifiWEPKeyWrongHEXSize128" : "Key length must be 26 characters. Empty key is not allowed", "wifi_master_advanced" : "Advanced settings", "menu_wifi_basic" : "Basic settings", "menu_wifi_common" : "Common settings", "commonEnableWiFi" : "Enable Wireless", "commonEnableWds" : "Broadcast wireless network", "wifiCommonOff" : "Disabled", "basicHideAP" : "Hide Access Point", "basicCFEblock" : " Restrict access to the Web-interface", "basicCountry" : "Country", "basicChannel" : "Channel", "basicMode" : "Wireless mode", "basicModeComment" : "When changing mode from \"B\"/\"G\" on any of the modes with \"N\" is recommended to re-tune security!", "basicClientMax" : "Max Associated Clients", "basicClientMaxTitle" : "0 - unlimited", "menu_wifi_security" : "Security settings", "securityAuthMode" : "Network Authentication", "securityAuthModeWarningOpen" : "Warning! Your wireless network is not secured!", "securityKeyPSK" : "Encryption Key PSK", "securityPreAuth" : "WPA2 Pre-authentication", "securitySectWEP" : "WEP Encryption settings", "securityWEP" : "Enable Encryption WEP", "securityWEPKeyLength" : "WEP key length", "securityWEPKeyID" : "Default Key ID", "securityWEPKey" : "Encryption Key WEP", "securityWEPKeyHEX" : "Encryption Key WEP as HEX", "securitySectRadius" : "RADIUS settings", "securityRadiusKey" : "RADIUS encryption key", "securitySectWPA" : "WPA Encryption settings", "securityWPAEnc" : "WPA Encryption", "securityWPARen" : "WPA reneval", "securityAuthModeWarningOpen" : "Warning! Your wireless network is not secured!", "menu_wifi_mac" : "MAC Filter", "wifiMacModeTab" : "Filter mode", "wifiMacAddrTab" : "MAC addresses", "wifiMacMode" : "MAC filter restrict mode", "wifiMacModeDis" : "Disabled", "wifiMacModeDen" : "Deny", "wifiMacModeAlw" : "Allow", "wifiMacAddLabel" : "MAC address adding", "wifiMacViewLabel" : "MAC address list", "wifiMacListForDelEmpty" : "Select MAC address(es) for deletion!", "menu_wifi_station_list" : "List of WiFi clients", "stalstAssoc" : "Associated", "stalstYes" : "Yes", "staListmac" : "MAC", "staListband" : "Band", "staListonline" : "Online", "staListlastTxRate" : "Last TX rate", "staListtx_bytes" : "Tx (bytes)", "staListrx_bytes" : "Rx (bytes)", "staListrssi" : "RSSI", "staListauthen" : "Authenticated", "staListauthor" : "Authorized", "staListassoc" : "Associated", "staListidle" : "Idle time", "stalstDisas" : "Disconnect", "staListForDelEmpty" : "Select MAC address(es) for deletion!", "stalstIdle" : "Idle time", "menu_wifi_wps" : "WPS", "wpsSectEnable" : "Enable/Disable WPS", "wpsEnable" : "WPS Enable", "wpsSectInfo" : "Information", "wpsStatus" : "WPS Status", "wpsAuth" : "Network Authentication", "wpsEncr" : "Encryption", "wpsPinDefault" : "Default PIN code", "wpsEncrKey" : "Encryption key", "wpsReset" : "Reset to unconfigured", "wpsSectConnect" : "Connection", "wpsMethod" : "WPS Method", "wpsPin" : "PIN Code", "wpsConnect" : "Connect", "wpsConf" : "Configured", "wpsUnconf" : "Unconfigured", "wpsPinError" : "PIN Code is invalid", "wpsConnStatus" : "Connection status", "wpsConnStatus0" : "Idle", "wpsConnStatus1" : "Processing WPS start... Please wait", "wpsConnStatus3" : "Fail due to WPS message exchange error!", "wpsConnStatus4" : "Fail due to WPS time out!", "wpsConnStatus7" : "Success", "wpsPinGenerate" : "Generate PIN", "wpsPinReset" : "Factory PIN", "menu_wifi_addon" : "Additional settings", "addonBand" : "Bandwidth", "addonKeepAlive" : "Station Keep Alive", "addonBgProt" : "BG Protection", "addonBeacon" : "Beacon Period", "addonRts" : "RTS Threshold", "addonFrag" : "Frag Threshold", "addonDtim" : "DTIM Period", "addonTxPwr" : "TX Power", "addonShortGI" : "Short GI", "menu_wifi_wmm" : "WMM", "wmmEnable" : "WMM", "wmmSectAP" : "Parameters of Access Point", "wmmSectSta" : "Parameters of Station", "wmmErrorAifsn" : "AIFSN out of range (1~15)!", "wmmOn" : "On", "wmmOff" : "Off", "menu_dsl_advanced" : "Advanced", "menu_statLanClients" : "LAN clients", "statLanClientsFlags" : "Flags", "statLanClientsSel" : "Select address", "menu_statClients" : "Сlients", "clearall" : "Clear all", "menu_misc" : "Miscellaneous", "igmpLabel" : "Internet Group Management Protocol settings", "igmpVersion" : "Version", "igmpNeedReboot" : "To apply changes, it is required to reboot the device", "igmpOff" : "Off", "menu_upnp" : "UPnP IGD", "upnpLabel" : "UPnP settings", "upnpAllWans" : "All WANs", "upnpRejectDelCon" : "As a result of your actions was an attempt to remove the compound, which is used for UPnP. You can not remove it. Go to page UPnP?", "upnpRejectDelCon" : "As a result of your actions was an attempt to remove the compound, which is used for UPnP. You can not remove it. Go to page UPnP?", "upnpWansNotFound" : "Not created any WAN-connection! You can not use UPnP created without WAN-connection. Go to page WAN?", "menu_statRoute" : "Routing table", "statRouteGateway" : "Gateway", "statRouteFlags" : "Flags", "menu_activeSessions" : "Active sessions", "activeSessionsSourceIp" : "Source IP", "activeSessionsSourcePort" : "Source port", "activeSessionsDestIp" : "Destination IP", "activeSessionsDestPort" : "Destination port", "menu_tr69" : "TR-069 Client", "tr69LabelInform" : "Inform settings", "tr69OnOff" : "Enable TR-069 Client", "tr69Enable" : "Enable", "tr69Interval" : "Interval", "tr69Auth" : "Authorization", "tr69UserName" : "User name", "tr69Password" : "Password", "tr69ConnReqPort" : "Request port", "tr69ConnReqPath" : "Request path", "tr69LabelAcs" : "Auto Configuration Server settings", "tr69LabelConn" : "ConnectionRequest Settings", "tr69URL" : "URL address", "tr69Debug" : "Debug information", "menu_system_log" : "System log", "slConfigTab" : "Configuration", "slLogTab" : "Log", "slLogging" : "Logging", "slType" : "Logging type", "slLocal" : "Local", "slRemote" : "Remote", "slBoth" : "Local and remote", "slLevel" : "Logging level", "slLevel0" : "System is not efficient", "slLevel1" : "Alert messages", "slLevel2" : "Critical events", "slLevel3" : "Error messages", "slLevel4" : "Different warnings", "slLevel5" : "Important notifications", "slLevel6" : "Informational messages", "slLevel7" : "Debugging messages", "slServer" : "Server", "slServerType" : "Server address type", "slServerWrong" : "Incorrect server address", "port" : "Port", "action" : "Action", "adding" : "Adding", "all_" : "<All>", "button_clear" : "Clear", "button_connect" : "Connect", "button_disconnect" : "Disconnect", "button_deflang_save" : "Save", "button_del" : "Delete", "button_enter" : "Enter", "button_export" : "Export", "button_save" : "Apply", "button_conf_save" : "Save", "button_input" : "Enter", "comment" : "Comments", "comment_download_config" : "Saving current configuration in a file", "comment_factory_config" : "Reset to factory defaults", "comment_upload_config" : "Loading previously saved configuration to device", "comment_save_current_config" : "Save current settings", "comment_reboot" : "Reboot device", "comment_logout" : "Exit", "config" : "Configuration", "conf_change_warning" : "Device configuration was changed. To continue configuration, you need to save the settings and reboot the device.", "conf_change_warning_save" : "Device configuration was changed. To continue configuration, you need to save the settings.", "confirm_reset_config" : "You are going to restore default settings.\nCurrent settings will be lost!", "button_factory" : "Factory", "button_config_download" : "Backup", "button_config_upload" : "Restore", "button_reboot" : "Reboot", "button_save_reboot" : "Save and Reboot", "alert_config_upload_ok" : "New setting uploaded successfully! In order new configuration to take effect please reboot the system.", "confirm_reboot" : "System will be rebooted!\nALL unsaved changes will be lost!\n Continue?", "reboot_is_complete" : "Device is ready!", "fwupdate_progress" : "Firmware update...", "rebooting" : "Rebooting...", "file_upload_progress" : "file uploading...", "file_upload_error" : "file upload error!", "file_upload_bad_fw" : "Incorrect firmware", "waitexceed" : "Waiting time exceed!", "lang" : "Language", "day" : "day", "date" : "Date", "filter" : "Data filter", "hour" : "hour", "authTitle" : "Authorization", "authComment" : "For accessing the settings, authorization is required", "hs_login" : "Login", "hs_password" : "Password", "hwaddr" : "MAC address", "ip_address" : "IP address", "out" : "Transmitted", "kbyte" : "Kbyte", "kbps" : "Kbps", "list" : "List", "logout" : "Logout", "masq" : "Mask", "byte" : "byte", "mbyte" : "Mbyte", "gbyte" : "Gbyte", "os" : "OS", "menu_index" : "Information", "menu_options_deflang" : "Default language", "menu_system_config" : "Configuration", "menu_system_firmware" : "Firmware upgrade", "menu_system_passw" : "Administrator password", "menu_system" : "System", "metric" : "Metric", "mtu" : "MTU Size", "name" : "Name", "none" : "None", "off" : "Off", "passw" : "Password", "protocol" : "Protocol", "version" : "Version", "refresh" : "Refresh", "system_in_reboot" : "System is rebooting, please wait...", "type_start_auto" : "Auto", "type_start" : "Start", "value" : "Value", "iface" : "Interface", "no" : "No", "yes" : "Yes", "minute" : "min", "second" : "sec", "status" : "Status", "enable" : "Enabled", "destination" : "Destination", "source" : "Source", "wanErrorMes" : "Some fields contain errors. In order to correct them, you may need to switch to the expert settings mode.", "wanGwifErr" : "Not set the default gateway. Internet access can be absent .", "localres" : "IP addresses of your ISP’s local resources", "localresDesc" : "Here the wizard can add IP addresses of your ISP’s local resources.", "menu_wan" : "Connections", "wanLabel" : "Connections", "wanDescText" : "You can add, edit and delete connections here", "wanAuth" : "Authentication algorithm", "wanConfirm" : "Password confirmation", "wanCreate" : "Create", "wanConfirmMismatch" : "Confirmation and password are different!", "wanDhcp" : "Obtain an IP address automatically", "wanDnsFromDhcp" : "Obtain DNS server addresses automatically", "wanEnable" : "Enable", "wanEncap" : "Encapsulation Mode", "wanErrors" : "The action is interrupted due to errors on the page", "wanFirewall" : "firewall", "wanGenSect" : "General settings", "wanGenSectDescText" : "Connection type and common settings", "wanGwIf" : "Default gateway", "wanGwIfv6" : "Default IPv6 gateway", "wanGwIp" : "Gateway IP address", "wanIdleTimeout" : "Maximum idle time (sec)", "wanIfaceL2" : "Physical interface", "wanIfaceL3" : "Interface", "wanIgmp" : "Enable IGMP Multicast", "wanRip" : "Enable RIP", "wanIsolation" : "Isolate connection", "wanIp" : "IP Address", "wanAliasIp" : "IP Address 2", "wanAliasIpv6" : "IPv6 Address 2", "wanAliasNat" : "NAT 2", "wanAliasFirewall" : "Firewall 2", "wanKeepAlive" : "Keep Alive", "wanL2Param" : "Physical interface", "wanL2Sect" : "Physical layer", "wanL2SectDescText" : "Physical interface selection and tunning", "wanL3IpSect" : "IP settings", "wanL3IpSectDescText" : "Internet Protocol settings", "wanL3PppSect" : "PPP settings", "wanL3PppSectDescText" : "Enter the username, password, and other settings provided by the ISP. Leave the default values for the remaining fields.", "wanLcpFails" : "LCP fails", "wanLcpInterval" : "LCP interval (sec)", "wanMask" : "Netmask", "wanAliasMask" : "Netmask 2", "wanMbs" : "Maximum Burst Size (cells)", "wanMiscSect" : "Miscellaneous", "wanMiscVPNSectDescText" : "Additional settings of VPN tunnel", "wanMtu" : "MTU", "wanName" : "Name", "wanNameWiz" : "Connection name", "wanNameDesc" : "The connection name has been generated automatically according to the specified parameters. You can specify another name or skip to the next step.", "wanNameEmpty" : "Empty name is not allowed", "wanNat" : "NAT", "wanNoAuth" : "Without authorization", "wanOnDemand" : "Dial on demand", "wanPassword" : "Password", "wanPasswordEmpty" : "Enter password", "wanPcr" : "Peak Cell Rate (cells/s)", "wanPppDebug" : "PPP debug", "wanPppIpExt" : "PPP IP extension", "wanPppoePassThrough" : "PPPoE pass through", "wanPppStaticIp" : "Static IP Address", "wanPppStaticIpv6" : "Static IPv6 Address", "wanPrimDns" : "Primary DNS server", "wanPingRespond" : "Ping", "man" : "Manually", "russia" : "Russia", "ukraine" : "Ukraine", "kazakhstan" : "Kazakhstan", "azerbaijan" : "Azerbaijan", "latvia" : "Latvia", "estonia" : "Estonia", "lithuania" : "Lithuania", "lmt" : "LMT", "bite" : "Bite", "emt" : "EMT", "elisa" : "Elisa", "omnitel" : "Omnitel", "beeline" : "Beeline", "megafon" : "Megafon", "mts" : "MTS", "tele2" : "Tele2", "umc" : "MTS", "jeans" : "JEANS", "kyivstar" : "Kyivstar", "abkyivstar" : "Kyivstar (ACE@BASE)", "djuice" : "djuice", "life" : "life", "kcell" : "Кcell", "neo" : "NEO", "pathword" : "PAThWORD", "bakcell" : "Bakcell", "azercell" : "Azercell", "narmobile" : "NarMobile", "megafonsib" : "Siberia Megafon", "altaysviaz" : "Altai connection", "megafonkvk" : "Caucasus Megafon", "megafonugsm" : "Ural Megafon", "megafonmc" : "Nizhny Novgorod Megafon", "utel" : "Utel", "ncc" : "NCC", "stekgsm" : "StekGSM", "matrixmobile" : "Matrix mobile", "simtravel" : "SIMTRAVEL", "etk" : "ЕТК", "bwc" : "БВК", "tatincomncc" : "Tatincom-NCC", "novcc" : "Novgorod Cellular Communication", "tambovgsm" : "Tambov GSM", "diex" : "Digital expansion", "ulgsm" : "Ulianovsk GSM", "motiv" : "Motive", "smarts" : "SMARTS", "megafoncenter" : "Center Megafon", "uucn" : "Ulan-Ude Cellular Network", "wanProv" : "Provider", "wanBuildForm" : "Form building...", "wanPvcBusy" : "The PVC is occupied by another connection, please select another VPI and/or VCI", "wanQos" : "QoS", "wanScr" : "Sustainable Cell Rate (cells/s)", "wanSecDns" : "Secondary DNS server", "wanServName" : "Service name", "wanType" : "Connection Type", "wanTypeWiz" : "Select connection type:", "wanUsePppStaticIp" : "Use Static IP Address", "wanUsePppStaticIpv6" : "Use Static IPv6 Address", "wanUserName" : "Username", "wanUseVlan" : "Use VLAN", "wanUserNameEmpty" : "Enter user name", "wanVci" : "VCI (32-65535)", "wanVlanId" : "VLAN ID", "wanVlanPr" : "VLAN priority", "wanVlanSect" : "VLAN settings", "wanVlanSectDescText" : "Virtual local area network settings", "wanVpi" : "VPI (0-255)", "kabinet_networks" : "restricted access (KABiNET network only) ", "kabinet_not_started" : "KABiNET not connected", "wanStatusUnconfigured" : "Unconfigured", "wanStatusConnecting" : "Connecting", "wanStatusAuthenticating" : "Authenticating", "wanStatusConnected" : "Connected", "wanStatusPendingDisconnect" : "Pending disconnect", "wanStatusDisconnecting" : "Disconnecting", "wanStatusDisconnected" : "Disconnected", "wanStatus" : "Status", "Connecting" : "Connecting", "Unconfigured" : "Unconfigured", "wanDirection" : "Direction", "wanVendorID" : "Vendor ID", "statDhcpHost" : "Hostname", "wanMetric" : "Metric", "wanNoPhyIfaceAvail" : "No interfaces available for connection of specified type", "wanNoUsbModemAvail" : "A connection of this type established via a 3G modem. Check if your 3G modem is connected.", "g3_connection_success" : "3G-modem plugged", "wanMac" : "MAC", "wanAuto" : "automatic", "wanWrongGwip" : "Gateway IP address is out of subnet", "wanStatusRtNotSameNet" : "This equipment can not establish a connection, as is intended for use only in the network Dom.ru", "pptp_encr" : "Encryption", "mppe_128" : "MPPE 128 bit", "mppe_40" : "MPPE 40 bit", "mppe_40_128" : "MPPE 40/128 bit", "no_encrypt" : "No encrypt", "wanPPTPSect" : "PPTP/L2TP settings", "wanPPTPSectDescText" : "PPTP and L2TP are methods for implementing virtual private networks.", "wanPPTPAuto" : "Connect automatically", "wanPPTPSName" : "VPN server address", "wanPPTPExtraOptions" : "Extra options", "wanPPTPIp" : "IP received", "wanPPTPSNameType" : "VPN server address type", "wanMtuPppMoreL2" : "PPP MTU can not be more then ethernet MTU", "wanPPPoESName" : "Service name", "wanExtraOptions" : "Extra options", "wanMain" : "Main", "wanCloneMACBtn" : "Clone MAC", "wanCloneMACError" : "MAC cloning error", "wanPort" : "Interface", "wanPortWiz" : "Select port or interface of the router:", "wanWrongGwip" : "Gateway IP address is out of subnet", "dhcpMain" : "DHCP server", "dhcpMode" : "Mode", "dhcpModeBlock" : "DHCP mode", "dhcpModeEn" : "Enable", "dhcpModeDis" : "Disable", "dhcpModeRelay" : "Relay", "dhcpExtIp" : "External DHCP server IP", "dhcpBegin" : "Start IP", "dhcpEnd" : "End IP", "dhcpLease" : "Lease time (min)", "dhcpMaskHoleRidden" : "Unable to adjust the DHCP server pool to IP settings. Incorrect subnet mask.", "dhcpCorrectReq" : "Adjust the DHCP server pool to IP settings?", "dhcpBeginOutOfRange" : "Start IP is outside the subnet", "dhcpEndOutOfRange" : "End IP is outside the subnet", "dhcpCorrectImpos" : "Unable to adjust the DHCP server pool to IP settings", "dhcpNewPool" : "New pool is", "dhcpMacIp" : "IP address", "dhcpMacMac" : "MAC address", "dhcpMacHostName" : "Host name", "dhcpMac" : "Static DHCP", "dhcpIPv6Info" : "Warning", "dhcpIPv6InfoMsg" : "Binding MAC addresses to IPv6 addresses works only if IPv6 support is enabled for the DHCP server", "dhcpMacDelRule" : "Remove", "dhcpMacAddRule" : "Add", "dhcpMacHasEmpty" : "Not all mandatory fields of static DHCP are filled in. Please, fill in the IP field and the MAC or Host field.", "dhcpMacClients" : "Known IP/MAC addresses", "dhcpMacClientsSel" : "Select IP/MAC address", "dnsRelay" : "DNS Relay", "dhcpMacClientsSel2" : "Select IP/MAC address", "dnsRelay" : "DNS Relay", "tftp_ip" : "DHCP option 66", "dhcp_v6_separator" : "IPv6 DHCP server", "dhcp_v6_enable" : "Enable DHCPv6 Server", "dhcp_v6_statemode" : "State mode", "dhcp_v6_stateless" : "Stateless", "dhcp_v6_statefull" : "Statefull", "dhcp_v6_begin" : "Start interface IP", "dhcp_v6_end" : "End interface IP", "dhcp_v6_lease" : "Leased Time (minutes)", "dhcp_v6_radvd" : "Enable RADVD", "wanNeedPINMesPart1" : "The 3G modem is blocked.
To create a 3G connection, you need", "wanNeedPINMesPart2" : "to enter the PIN or PUK code.
", "wanNeedPINMesPart3" : "Enter the code or change the connection type. ", "wanUseMultiPVC" : "Allow to create several connections assigned to this port", "advPPP" : "Advanced PPP settings", "advIP" : "Advanced IP settings", "dynamic" : "Dynamic IP", "static" : "Static IP", "dynkab" : "Dynamic IP + KABiNET", "statkab" : "Static IP + KABiNET", "dynkabdesc" : "A connection of this type allows obtaining an IP address automatically from your ISP. A connection of this type requires a password.", "statkabdesc" : "A connection of this type allows using a fixed IP address, provided by your ISP. A connection of this type requires a password.", "dynpptp" : "PPTP + Dynamic IP", "statpptp" : "PPTP + Static IP", "statpptpdesc" : "A connection of this type is protected by a special tunnel in the standard non-protected network. This type is used by some ISPs. It requires a username and password. When this type is selected, you can specify a fixed IP address for the non-protected network before configuring the tunnel.", "pptpdesc" : "A connection of this type is protected by a special tunnel in the standard non-protected network. This type is often used for establishing virtual private networks (VPN). It requires a username and password.", "dynpptpv6desc" : "A connection of this type is protected by a special tunnel in the standard non-protected network and has IPv6 support. This type is used by some ISPs. It requires a username and password. When this type is selected, you automatically obtain an IP address for the non-protected network from the ISP.", "statpptpv6desc" : "A connection of this type is protected by a special tunnel in the standard non-protected network and has IPv6 support. This type is used by some ISPs. It requires a username and password. When this type is selected, you can specify a fixed IP address for the non-protected network before configuring the tunnel.", "dynl2tp" : "L2TP + Dynamic IP", "statl2tp" : "L2TP + Static IP", "pppoedesc" : "A connection of this type requires a username and password. This type is used for connection via Ethernet or via DSL.", "statpppoe" : "PPPoE + Static IP", "statpppoedesc" : "A connection of this type is the combination of the Static IP and PPPoE types. This type can be necessary when you need to configure access to your ISP’s LAN and the Internet access simultaneously.", "dynpppoe" : "PPPoE + Dynamic IP", "dynpppoedesc" : "A connection of this type is the combination of the Dynamic IP and PPPoE types. This type can be necessary when you need to configure access to your ISP’s LAN and the Internet access simultaneously.", "dynpptpdesc" : "A connection of this type is protected by a special tunnel in the standard non-protected network. This type is used by some ISPs. It requires a username and password. When this type is selected, you automatically obtain an IP address for the non-protected network from the ISP.", "pppoe" : "PPPoE", "staticdesc" : "A connection of this type allows using a fixed IP address, provided by your ISP.", "dynamicdesc" : "A connection of this type allows obtaining an IP address automatically from your ISP.", "onport" : "on the port", "oniface" : "on the interface", "onpvc" : "on the PVC", "inetwizphrase1" : "Get necessary information about Internet access type from Your provider.", "inetwizphrase2" : "You can edit existing connection basing on this information:", "inetwizphrase3" : "or", "inetwizphrase4" : "add new one", "inetwizphrase5" : "You can go back from any step of the wizard", "inetwizphrase6" : "to the main page", "inetwizphrase7" : "by clicking on D-Link logo.", "inetwizphrase8" : "You can", "inetwizphrase9" : "add new connection", "inetwizphrase10" : "based on this information.", "wanEthPort" : "Ethernet port of the router.", "wanPtmPort" : "PTM interface of router", "wanATMPort" : "ATM interface of the router", "wan3GPort" : "USB interface of the router", "wanAutoPort" : "Assign automatically.", "pppoedesc" : "A connection of this type requires a username and password. This type is used for connection via Ethernet or via DSL.", "pppoadesc" : "A connection of this type is an alternative to the PPPoE type. This type is used by some ISPs for connection via DSL. A connection of this type requires a username and password.", "ipoadesc" : "A connection of this type allows using a fixed IP address, provided by your ISP. This type is used by some ISPs for connection via DSL.", "staticdesc" : "A connection of this type allows using a fixed IP address, provided by your ISP.", "dynamicdesc" : "A connection of this type allows obtaining an IP address automatically from your ISP.", "statpptpdesc" : "A connection of this type is protected by a special tunnel in the standard non-protected network. This type is used by some ISPs. It requires a username and password. When this type is selected, you can specify a fixed IP address for the non-protected network before configuring the tunnel.", "dynpptpdesc" : "A connection of this type is protected by a special tunnel in the standard non-protected network. This type is used by some ISPs. It requires a username and password. When this type is selected, you automatically obtain an IP address for the non-protected network from the ISP.", "g3desc" : "A connection of this type is established via a 3G modem. It requires a username and password.", "bridgedesc" : "A connection of this type is a transparent bridge. This type is often used for connection via DSL in couple with a PPPoE connection configured on your PC.", "pptpdesc" : "A connection of this type is protected by a special tunnel in the standard non-protected network. This type is often used for establishing virtual private networks (VPN). It requires a username and password.", "wanProvSect" : "Choose Your provider", "wanProvDesc" : "From the Provider drop-down list, select your country and operator if you are going to configure a 3G network connection, or leave the Manual value, if you are going to configure a WAN connection of another type or you want to specify all settings for your 3G WAN connection independently.", "wanAddNew" : "Add new", "wandelwarn" : "The existing connection will be removed when creating a new one. Continue?", "help_LAN" : "The LAN page is designed for editing the parameters of the router's local interface.
In the Static DHCP section, you can specify MAC address and IP address pairs.
In the DHCP server section, you can configure the built-in DHCP sever of the router", "help_ex_LAN" : "If needed, edit the basic parameters of the local interface.
Parameter Description
IP Address The IP address of the router in the local subnet.
Netmask The mask of the local subnet.
When needed settings are configured, click the Save button.

In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IP address in the local area network for a device with a certain MAC address). The router assigns IP addresses in accordance with the specified pairs only when the DHCP server is enabled (in the DHCP server section, in the Mode drop-down list, the Enable value is selected).
To create a MAC-IP pair, click the Add button and specify the following parameters:
Parameter Description
IP address An IP address which will be assigned to the device with the specified MAC address.
MAC address The MAC address of the device from the LAN.
When all needed MAC-IP pairs are specified, click the Save button.
Existing MAC-IP pairs are displayed in the table of the Static DHCP section. To remove a pair, select the relevant line in the table and click the Remove button. Then click the Save button.

In the DHCP server section, you can configure the built-in DHCP sever of the router.
Parameter Description
Mode An operating mode of the router's DHCP server.
Enable: the router assigns IP addresses to clients automatically in accordance with the specified parameters. When this value is selected, the Start IP, End IP, and the Lease time fields are displayed on the page.
Disable: the router's DHCP server is disabled, clients' IP addresses are assigned manually.
Relay: an external DHCP server is used to assign IP addresses to clients. When this value is selected, the External DHCP server IP field is displayed on the page.
Start IP The start IP address of the address pool used by the DHCP server to distribute IP addresses to clients.
End IP The end IP address of the address pool used by the DHCP server to distribute IP addresses to clients.
Lease time The lifetime of IP addresses leased by the DHCP server. At the end of this period the leased IP address is revoked and can be distributed to another device, unless the previous device has confirmed the need to keep the address.
External DHCP server IP The IP address of the external DHCP server which assigns IP addresses to the router's clients.
When all needed settings are configured, click the Save button.", "modeswitchtip" : "Use this switch to enter or exit the expert mode.", "brief" : "Brief", "expert" : "Expert", "wanEnIGMPMes" : "IGMP support is globally disabled for the device. Enable?", "wanDisGw" : "Disable all gateways", "lanIpReserved" : "Using this LAN IP address and network mask pair is disabled.", "wanIpv6By" : "Get IPv6", "wanIpv6ByDhcpv6" : "IPv6 by DHCPv6", "wanIpv6BySlaac" : "by SLAAC", "wanIpv6ByDhcpv6PD" : "IPv6 by DHCPv6 PD", "wanIpv6auto" : "Automatically", "wanIPv6GwSect" : "IPv6 gateway", "wanIPv6DnsSect" : "IPv6 DNS addresses", "wanIPv6GwBySlaac" : "Gateway by SLAAC", "lng_config_general_error" : "Unknown error!", "lng_g3_empty_sms" : "Send empty SMS message?", "lng_g3_newpin_empty" : "Empty PIN code is not allowed. Check \"Disable PIN check\" to disable PIN code check.", "lng_g3_pin_mismatch" : "New PIN code and PIN code confirmation do not match.", "lng_g3_pin_wrong" : "Check if the PIN code is correct. It must consist of 4-8 digits!", "lng_g3_invalid_number" : "Invalid phone number!", "view" : "Theme", "reset_and_reboot_progress" : "Reseting configuration...", "config_aplly_ok_reboot" : "The new configuration has been applied successfully.\nTo apply changes, it is required to reboot the device.\nReboot now?", "config_aplly_ok" : "The new configuration has been applied successfully.", "lng_config_upload_failed" : "Can not apply new settings! A file have wrong format or corrupted", "lng_config_wrong_device" : "These settings are intended for another device and not compatible with your device!", "lng_config_other_version" : "These settings are intended for another firmware version.\nYour may apply them at your own risk!", "lng_config_unknown_target_device" : "Can not detect firmware version for your device.\nYour may apply new settings at your own risk!", "lng_config_unknown_device" : "Can not find firmware VERSION information in uploaded configuration.\nYour may apply new settings at your own risk!", "rpcok" : "Ok!", "rpcneedreboot" : "Command executed succesfully.\nPlease reboot device.", "rpcerror" : "Command has failed", "rpcstatus" : "Return code is", "netAddrEmpty" : "Fill the field", "netAddrNaN" : "Only numbers are valid", "netAddrOutOfScope" : "Out of range", "netAddrInvalid" : "Net address wrong format", "netAddrOrDomainInvalid" : "Net address or domain name wrong format", "numEmpty" : "Fill the field", "numLessThanMin" : "Number is less then minimum", "numMoreThanMax" : "Number is more then maximum", "numNaN" : "Only numbers are valid", "change_ip_progress" : "Changing IP address", "ch_passw_warning" : "At the moment the default password is specified. For security reasons, it is recommended to change the password.", "passwDesc" : "Need change the default password", "passwDescText" : "The system password and the password for the web-based interface will be changed at the same time.", "passwLogin" : "Login", "passwPassword" : "Password", "passwConfirm" : "Confirmation", "passChanged" : "Password changed", "passwPasswordEmpty" : "Enter password", "passwConfirmMismatch" : "Confirmation and password are different!", "passwConfirmCirill" : "Password and confirm password should not contain Cyrillic alphabet!", "passwErrors" : "Several fields contain errors", "passwInvalid" : "Entered an invalid password", "passwInvalidLogin" : "Password should not coincide with the login", "needreset" : "It is recommended to restore the factory setting.", "menu_vlan" : "VLAN", "vlanName" : "Name", "vlanEnable" : "Enable", "vlanVid" : "VLAN ID", "vlanQos" : "QoS", "vlanVidBusy" : "VLAN ID is busy", "vlanTrRulesNoDbTag" : "A group of this type may consist of one tagged port and several untagged ports. It is also forbidden to add LAN-ports with a tag, WAN-port and WIFI without a tag.", "vlanNatRulesNoDbTag" : "Under this type must contain WAN or WiFi", "service_vlan" : "This VLAN is used for service purposes. You cannot edit or delete it.", "vlanType" : "Type", "vlanPortsU" : "Untagged ports", "vlanPortT" : "Tagged port", "vlan_wanu" : "Untagged NAT", "vlan_lan" : "LAN", "vlan_bridge" : "Bridge", "vlan_want" : "Tagged NAT", "vlanPortsT" : "Tagged port", "vlanPortsU" : "Untagged ports", "vlanMulticast" : "Multicast", "vlanErrPortsT" : "Port cannot be selected as tagged and untagged in the same group", "vlanErrNoPorts" : "Group must contain at least one untagged port", "vlanUnknownType" : "Unknown group type", "vlanNameBusy" : "This name is already used", "vlanLimitWanT" : "Maximum tagged NAT groups number is", "vlanLimitWanU" : "Maximum untagged NAT groups number is", "vlanLimitWan" : "Maximum NAT groups number is", "vlanNoFreePortsU" : "No free ports available. Remove ports from other groups to make them available.", "vlanKillAllConns2" : "Before editing remove connections:", "vlanKillAllConns3" : "Remove connections:", "vlanDelConfirm" : "Do You really want to remove VLAN?", "themeNormal" : "classic", "themeCompact" : "fast navigation", "disconnect" : "Disconnect", "button_refresh" : "refresh", "dB" : "dB", "dBm" : "dBm", "msec" : "msec", "startSepDevInfo" : "Device information", "startSepAdslStatus" : "DSL Status", "devInfoName" : "Model", "devInfoVersion" : "Firmware version", "devInfoBuildTime" : "Build time", "devInfoVendor" : "Vendor", "devInfoBugs" : "Support", "devInfoSummary" : "Summary", "devInfoBoardId" : "Board ID", "devInfoSoftRev" : "Web revision", "devInfoLanIp" : "LAN IP", "devInfoLanIpv4" : "LAN IPv4", "devInfoLanIpv6" : "LAN IPv6", "devInfoLanMac" : "LAN MAC", "save" : "Save", "devInfoWanType" : "WAN type", "devInfoWanPrefix" : "Prefix", "devInfoWanStatus" : "WAN connection status", "devInfoWanStatus_v4" : "WAN connection status (IPv4)", "devInfoWanStatus_v6" : "WAN connection status (IPv6)", "devInfoWanDisconnectCause" : "The reason for the disconnection", "wanStatuscableDisconnect" : "Cable is not connected", "wanStatusUnknown" : "Unknown error", "wanStatusUserRequest" : "User request", "wanStatusPeerNotResponding" : "Peer not responding", "wanStatusPeerRefused" : "Peer refused to authenticate", "wanStatusNoNetworkProtocols" : "No network protocols running", "wanStatusAuthFailed" : "Authentication failed", "wanStatusFailedToAuth" : "Failed to authenticate ourselves to peer", "wanStatusMppeDisabledByPeer" : "MPPE disabled by peer", "wanStatusMppeReqButPeerNogot" : "MPPE required but peer negotiation failed", "wanStatusMppeReqButNotAvail" : "MPPE required but not available", "wanStatusMppeReqButCantNegot" : "MPPE required but cannot negotiate MPPE", "wanStatusMppeReqButNotAvInK" : "MPPE required but not available in kernel", "wanStatusCannotNegotiateMppe" : "Cannot negotiate MPPE key length", "wanStatusTooManyMppeErrors" : "Too many MPPE errors", "wanStatusTrafficLimit" : "Traffic limit", "wanStatusLinkInactive" : "Link inactive", "wanStatusConnectTimeExpired" : "Connect time expired", "wanStatusLoginFailed" : "Login failed", "wanStatusMultilinkReq" : "Multilink required", "wanStatusLoopbackDetected" : "Loopback detected", "wanStatusCallMeBack" : "Call me back, please", "wanStatusCodeRej" : "CodeRej", "wanStatusNotCreated" : "No connection is created or no installed default gateway", "wanStatusDhcpError" : "DHCP-server error", "wanConnected" : "Connected", "wanDisconnected" : "Disconnected", "wanStatusServerNotAvailable" : "Server not available", "wanStatusPeerNegotiationFailed" : "Peer negotiation failed", "nstName" : "Name", "nstType" : "Type", "nstIp" : "IP", "nstMask" : "Mask", "nstGw" : "Gateway", "nstMac" : "MAC", "nstMtu" : "MTU", "nstRxTx" : "Rx/Tx", "nstState" : "Status", "nstStateUp" : "Up", "nstStateDown" : "Down", "nstConnStat" : "Connections status", "nstBSendRecieved" : "Transmitted / received bytes", "nstPSendRecieved" : "Transmitted / received packets", "nstSendRecievedErrors" : "Errors when sending / receiving", "nstDropRecievedErrors" : "Dropped when sending / receiving", "ping_host" : "Host", "ping_count" : "Count of packets", "menu_ping" : "Ping", "button_ping" : "Ping", "ping_log" : "Log", "pingTo" : "PING", "pingTime" : "Time", "pingMs" : "ms", "pingTtl" : "ttl", "pingTransmited" : "Transmited", "pingReceived" : "Received", "pingLoss" : "Loss", "pingError" : "Failure. Check the address of the host or you can try a smaller number of packets.", "pingHostEmpty" : "Enter host", "ping_eternal" : "Background ping", "ping_eternal_status" : "Background ping status", "ping_v6" : "IPv6", "menu_traceroute" : "Traceroute", "troHost" : "Host", "troNoOut" : "Network unreachable", "troEmptyHost" : "Enter host name or IP address", "troV6" : "IPv6", "help_menu_ddns" : "On the DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses. To add a new DDNS service, click the Add button.", "help_menu_wifi_common" : "Wi-Fi is the wireless connection. Here you can configure general settings of the WLAN.", "help_menu_wifi_basic" : "Here you can configure basic parameters of the WLAN.", "help_menu_wifi_wds" : "Wireless Distribution System (WDS) is a technology which helps to expand the range of a wireless network by interconnecting several access points into one network without the necessity for a wired connection (which is required for the traditional network scheme). On the WDS page, you can enable the WDS function and select its mode", "help_menu_stat" : "On the Network statistics page, you can view statistics for all interfaces (connections) existing in the system.", "help_menu_wimaxinfo" : "On the Information page, you can connect to the network of your WiMAX ISP to establish a high-speed wireless connection to the Internet.", "help_menu_rproxy" : "Select the device you want to use.", "help_menu_system_passw" : "On the Administrator password page, you can change the password for the administrator account used to access the web-based interface of the router.", "help_menu_system_log" : "On the System log page, you can set the system log options and configure sending the system log to a remote host.", "help_menu_system_firmware" : "On the Firmware upgrade page, you can upgrade the firmware of the router.", "help_menu_wifi_mac" : "On the page you can configure the MAC filter. The filter for MAC addresses of network interface cards is a very convenient way of blocking connection of unwanted users to your LAN.", "help_ex_menu_wifi_wds" : "The following fields are available on the page:
Parameter Description
WDS ModeThe WDS function mode.
Disable: The function is disabled.
Bridge mode: Access points communicate to each other only, wireless devices cannot connect to them.
Repeater mode: Access points communicate to each other, wireless clients can connect to the WLAN created by interconnected access points.
WDS Phy ModeA physical mode of data transfer between access points interconnected via the WDS function.
CCK: 802.11b devices only.
OFDM: 802.11g devices only.
HTMIX: 802.11g and 802.11n devices.
GREENFIELD: 802.11n devices only.
WDS EncryptionA type of encryption for data transfer between access points interconnected via the WDS function.
NONE: No encryption.
WEP.
TKIP.
AES.
Encryption Key A key for the specified type of encryption. If the NONE value is selected from the WDS Encryption drop-down list, the field is not displayed.
WDS MAC (1-4)The MAC addresses of devices connected to the router via the WDS function.
Attention!
The WDS function parameters specified on the page must be the same for all interconnected devices. In addition, it is required to set the same channel (on the Basic settings page ).
When you have configured the parameters, click the Change button.", "help_menu_wifi_security" : "Here you can configure security of your WLAN.", "help_menu_wifi_addon" : "On the Additional settings page, you can define additional parameters for your WLAN.
Attention!
Changing parameters presented on this page may negatively affect your WLAN.", "help_menu_wifi_client" : "On the Client page, you can configure the router as a client to connect to a wireless access point.
As a rule, the client mode is used to connect to a WISP network. All parameters specified on this page should be provided by your WISP.", "help_menu_flow_control" : "Flow Control On the Flow Control page, you can enable and disable data flow control for the WAN port of the router. This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this function needs to be enabled.", "help_ex_menu_flow_control" : "To enable the flow control function, select the Enabled checkbox and click the Apply button. To disable the flow control function, deselect the Enabled checkbox and click the Apply button.", "helpLabel" : "Help", "help_menu_dns" : "On the DNS page, you can add DNS servers to the system.
DNS servers are used to determine the IP address from the name of a server in Intranets or the Internet (as a rule, they are specified by an ISP or assigned by a network administrator).", "helpExtendedClose" : "Close", "help_ex_menu_wifi_client" : "When the Enable client checkbox is selected, the List of wireless networks section is displayed on the page. The section contains data on the number of available and hidden wireless networks and the table presenting the list of available networks with their SSIDs, BSSIDs, wireless modes, channel numbers, authentication types and signal levels. To refresh the list of networks, click the Search button.
To connect to a wireless network, fill in the fields on the page.
Parameter Description
SSIDThe name of the network to which the router connects.
BSSIDThe unique identifier of the network to which the router connects.
Network AuthenticationThe authentication type of the network to which the router connects.
When the Open or Shared authentication type is selected, the following fields are available:
Parameter Description
Enable Encryption WEPThe checkbox activating WEP encryption. When the checkbox is selected, the Default Key ID field and four Encryption Key WEP fields are displayed on the page. For the Shared authentication type the checkbox is always selected.
Default Key IDThe number of the key (from first to fourth) which will be used for WEP encryption.
Encryption Key WEP (1-4) Keys for WEP encryption. The router uses the key selected from the Default Key ID drop-down list. It is required to specify all the fields. You can specify keys containing 5 or 13 symbols (use digits and/or Latin characters).
When the WPA-PSK or WPA2-PSK authentication type is selected, the following fields are available:
Parameter Description
WPA Encryption An encryption method: TKIP, AES, or TKIP+AES.
Encryption Key PSK A key for WPA encryption. The key can contain digits and/or Latin characters.
When you have configured the parameters, click the Change button.", "help_menu_vlan" : "On the VLAN page, you can create and edit groups of ports for virtual networks (VLANs). To create a new group for VLAN, click the Add button.", "help_menu_ntp" : "On the NTP client page, you can configure automatic synchronization of the system time with a time server on the Internet.", "help_menu_routing" : "On the Routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system. To create a new route, click the Add button.", "help_menu_index" : "The Information page displays general information on the device and its software.", "help_vserversMenu" : "On the Virtual servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
To create a new virtual server, click the Add button.", "help_ex_menu_wifi_mac" : "The MAC filter can operate in three modes: Disabled: no filtering is performed, Allow: the filter blocks access to your LAN for all devices, except for those which MAC addresses are specified in the list, Deny: the filter allows access to your LAN only for devices which MAC addresses are specified in the list. On the Filter mode tab, you can select an operating mode.
On the MAC addresses tab, you can add MAC addresses to the list. To add a MAC address to the list, enter this address in the MAC address field and click the Add button.
To delete a MAC address from the list, highlight it and click the Delete button.", "help_menu_macfilter" : "On the MAC filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
To specify a new address for the MAC filter, click the Add button.", "help_menu_wifi_station_list" : "On the Station list page, you can view the list of wireless devices connected to the router.", "help_menu_upnp" : "Here you can configure automatic port forwarding via the UPnP IGD (Universal Plug and Play Internet Gateway Device) protocol.", "help_menu_igmp" : "On the IGMP page, you can enable IGMP for the router.
IGMP is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resources for some applications, e.g., for streaming video, more efficiently.", "help_ex_menu_wifi_station_list" : "If you want to disconnect a wireless device from your WLAN, select the checkbox in the line containing the relevant MAC address and click the Disconnect button, after that the device will be immediately disconnected from the WLAN.
To view the latest data on the devices connected to the WLAN, click the Refresh button.", "help_ex_menu_wifi_addon" : "The following fields are available on the page:
Parameter Description
Station Keep AliveThe time interval (in seconds) between keep alive checks of wireless devices from your WLAN. When the value 0 is specified, the checking is disabled.
Beacon Period The time interval (in milliseconds) between packets sent to synchronize the wireless network.
RTS Threshold The minimum size (in bites) of a packet for which an RTS frame is transmitted.
Frag ThresholdThe maximum size (in bites) of a non-fragmented packet. Larger packets are fragmented (divided).
DTIM Period The time period (in seconds) between sending a DTIM (a message notifying on broadcast or multicast transmission) and data transmission.
TX Power The router's transmit power (in percentage terms).
BG Protection The 802.11b and 802.11g protection function is used to minimize collisions between devices of your wireless network.
Select a value from the drop-down list.
Auto: The protection function is enabled and disabled automatically depending on the state of the network (this value is recommended if your wireless local area network consists of both 802.11b and 802.11g devices).
Always On: The protection function is always enabled (this setting can substantially lower the efficiency of your wireless network).
Always Off: The protection function is always disabled.
TX Preamble This parameter defines the length of the CRC block sent by the router when communicating to wireless devices.
Select a value from the drop-down list:
Long Preamble.
Short Preamble (this value is recommended for networks with high-volume traffic).
When you have configured the parameters, click the Change button.", "help_menu_wifi_wps" : "On the WPS page, you can enable the function for secure configuration of the WLAN", "help_menu_wifi_wmm" : "On the WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
To enable the function, select the WMM checkbox and click the Change button.
Attention!
All needed settings for the WMM function are specified in the system. It is recommended not to change the default values.", "help_menu_rmtAccess" : "On the Remote access page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
To create a new rule, click the Add button.", "help_menu_g3info" : "On the Information page, you can view data on the 3G modem connected to the router.", "help_menuIPFilter" : "On the IP filters page, you can create new rules for filtering IP packets and edit or remove existing rules. To create a new rule, click the Add button.", "help_ex_menu_wifi_wps" : "The WPS function helps to configure the protected wireless network automatically. Devices connecting to the wireless network via WPS must support the WPS function.
Attention!
If the WLAN is splitted into parts (the value 2, 3, or 4 is selected from the MBSSID drop-down list), the WPS function can be used only for the first part of the WLAN (the first value from the BSSID drop-down list).
Attention!
Before using the WPS function it is required to configure a type of WPA encryption.", "help_ex_menu_wifi_wmm" : "The WMM function allows assigning priorities for four Access Categories (AC): Parameters of the Access Categories are defined for both the router itself (in the WMM Parameters of Access Point section) and wireless devices connected to it (in the WMM Parameters of Station section).
For every Access Category the following fields are available:
Parameter Description
AifsnArbitrary Inter-Frame Space Number.
This parameter influences time delays for the relevant Access Category. The lower the value, the higher is the Access Category priority.
CWMin/CWMax Contention Window Minimum/Contention Window Maximum.
Both fields influence time delays for the relevant Access Category. The CWMax field value should not be lower, than the CWMin field value. The lower the difference between the CWMax field value and the CWMin field value, the higher is the Access Category priority.
Txop Transmission Opportunity.
The higher the value, the higher is the Access Category priority.
ACM Admission Control Mandatory.
If selected, prevents from using the relevant Access Category.
Ack Acknowledgment. Answering response requests while transmitting. Displayed only in the WMM Parameters of Access Point section.
If not selected, the router answers requests.
If selected, the router does not answer requests.
When you have configured the parameters, click the Change button.", "help_ex_menu_vlan" : "You can specify the following parameters:
ParameterDescription
NameA name for the port for easier identification.
EnableSelect the checkbox to allow using this group of ports.
TypeThe type of the VLAN which identifier is specified in the VLAN ID field.
Local. The group of this type is a channel used to connect local clients to the router. It is mostly used to connect different types of clients, which require separate connection settings.
NAT. The group of this type is an external connection with address translation. It is mostly used to connect to the Internet. Later the VLAN which identifier is specified in the VLAN ID field is used to create a WAN connection.
Transparent. The group of this type is a transparent connection between an internal port and an external connection. It is mostly used to connect IPTV set-top boxes.
VLAN IDAn identifier of the VLAN to which this group of ports will be assigned.
PortFrom the list, select an available port to assign it to this group. The port will be displayed in the table at the bottom of the page.
QoSA priority tag for the traffic transmitted through the port highlighted in the table at the bottom of the page.
TagSelect a value for the port highlighted in the table at the bottom of the page:
tagged,
untagged .
Click the Save changes button.
Click the Delete port button to delete the port highlighted in the table at the bottom of the page.
Click the Delete VLAN button to delete this group of ports form the system.
Attention! For further use of groups of ports for VLAN it is required to save the changed settings to the non-volatile memory of the router and reboot it (click the Save&Reboot line in the top-page menu displayed when the mouse pointer is over the System caption).", "help_ex_menu_upnp" : "If you want to manually specify all parameters needed for network applications, deselect the Enabled checkbox and click the Change button.
If you want to enable the UPnP IGD function in the router, select the Enabled checkbox, select an interface for which the router's parameters will be automatically configured from the Interface drop-down list, and click the Change button.", "help_ex_menu_ddns" : "You can specify the following parameters:
Parameter Description
DDNS Service Select a DDNS provider from the drop-down list.
HostThe domain name registered at your DDNS provider.
User nameThe username to authorize for your DDNS provider.
User passwordThe password to authorize for your DDNS provider.
InterfaceSelect a WAN connection which IP address will be used to access the DDNS service.
Update periodAn interval (in minutes) between sending data with the IP address of the interface specified in the field above to the relevant DDNS service.
Click the Change button.
To edit parameters of the existing DDNS service, click the relevant service link. On the opened page, change the needed parameters and click the Change button.
To remove an existing DDNS service, click the relevant service link. On the opened page, click the Delete button", "help_ex_menu_index" : "From the Information page you can proceed to the page for upgrading the router\'s firmware, contact the technical support group, and proceed to the settings of the local interface or the device\'s WLAN.
To upgrade the firmware of the router, left-click the current firmware version (the right column of the Firmware version line). After clicking the line, the System / Firmware upgrade page opens.
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the right column of the Support line). After clicking the line, the e-mail client window for sending a new letter to the specified address opens.
To edit the router\'s local interface parameters, left-click the IP or MAC address of the local interface (the right column of the LAN IP line or LAN MAC line correspondingly). After clicking the line, the page for editing the LAN interface opens.
To configure the router\'s WLAN parameters, left-click the SSID of the WLAN (the right column of the SSID line). After clicking the line, the Wi-Fi / Basic settings page opens.", "help_ex_menu_dns" : "The device performs the DNS relay function, i.e., it redirects the DNS requests of users to external DNS servers. You can specify the addresses of DNS servers manually on this page, or configure the router to obtain DNS servers addresses automatically from your ISP upon installing a connection.
Attention!
When you use the built-in DHCP server, the network parameters (including DNS servers) are distributed to clients automatically.
To configure automatic obtainment of DNS servers addresses, deselect the Manual checkbox, select a WAN connection which will be used to obtain addresses of DNS servers automatically from the Interface drop-down list or select the Default route checkbox, so that the router could use the connection set as the default gateway (on the Net / WAN page) to obtain DNS server addresses, and click the Change button.
To specify the DNS server manually, select the Manual checkbox and enter a DNS server address in the Name servers list. Then click the Change button.
To remove a DNS server from the DNS page, remove the relevant line from the Name servers field and click the Change button.", "help_ex_menu_routing" : "You can specify the following parameters:
Parameter Description
Destination network A destination network to which this route is assigned.
Destination netmaskThe destination network mask.
Gateway An IP address through which the destination network can be accessed.
MetricA metric for the route. The lower the value, the higher is the route priority. Optional.
Via InterfaceSelect an interface through which the destination network can be accessed from the drop-down list. If you have selected the Auto value of this drop-down list, the router itself sets the interface on the basis of data on connected networks.
Click the Save button.
To edit an existing route, click the relevant route link. On the opened page, change the needed parameters and click the Save button.
To remove an existing route, click the relevant route link. On the opened page, click the Delete button.", "help_ex_menu_rmtAccess" : "You can specify the following parameters:
Parameter Description
IP address A host or a subnet to which the rule is applied.
Mask The mask of the subnet.
Protocol The protocol available for remote management of the router.
Public port An external port of the router. You can specify only one port.
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete button.", "help_ex_menu_igmp" : "To enable IGMP, select the Enabled checkbox. From the Version drop-down list, select a version of IGMP. Then click the Change button. Such a setting allows using the IGMP Proxy function for all WAN connections for which the Enable IGMP Multicast checkbox is selected.
To disable IGMP, deselect the Enabled checkbox and click the Change button.", "help_ex_menuIPFilter" : "You can specify the following parameters:
Parameter Description
IP filter rule editing
Name A name for the rule for easier identification.
ProtocolA protocol for network packet transmission. Select a value from the drop-down list.
ActionSelect an action for the rule.
ACCEPT: Allows packet transmission in accordance with the criteria specified by the rule.
DROP: Denies packet transmission in accordance with the criteria specified by the rule.
IP Addresses
SourceThe source host/subnet IP address. To specify an IP address add /32.
DestinationThe destination host/subnet IP address. To specify an IP address add /32.
Ports
SourceA port of the source IP address. You can specify one port, several ports separated by a comma, or a range of ports separated by a colon.
DestinationA port of the destination IP address. You can specify one port, several ports separated by a comma, or a range of ports separated by a colon.
Click the Change button.
To edit a rule for IP filtering, click the link to the relevant rule. On the opened page, change the needed parameters and click the Change button.
To remove a rule for IP filtering, click the link to the relevant rule. On the opened page, click the Delete button.", "help_ex_vserversMenu" : "You can specify the following parameters:
Parameter Description
Template Select a virtual server template from the drop-down list, or select Custom to specify all parameters of the new virtual server manually.
NameA name for the virtual server for easier identification. You can specify any name.
InterfaceA WAN connection to which this virtual server will be assigned.
ProtocolA protocol that will be used by the new virtual server. Select a value from the drop-down list.
Public port (begin) / Public port (end)A port of the router from which traffic is directed to the IP address specified in the Private IP field. Specify the start and the end value for the port range. If you need to specify one port, enter the needed value in the Public port (begin) field and leave the Public port (end) field blank.
Private port (begin) / Private port (end)A port of the IP address specified in the Private IP field to which traffic is directed from the Public port. Specify the start and the end value for the port range. If you need to specify one port, enter the needed value in the Private port (begin) field and leave the Private port (end) field blank.
Private IP The IP address of the server from the local area network.
Click the Change button.
To edit the parameters of an existing server, follow the link with the name of the server. On the opened page, change the needed parameters and click the Change button.
To remove an existing server, follow the link with the name of the server. On the opened page, click the Delete button.", "help_menu_dmz" : "A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network. On the DMZ page, you can specify the IP address of the DMZ host.", "help_ex_menu_dmz" : "To enable the DMZ, select the Enabled checkbox, enter the IP address of a host from your network in the IP address field, and click the Change button.
Note that when the DMZ is enabled, all traffic coming to a port of the WAN interface of the router is directed to the same port of the specified IP address. Also note that virtual servers have higher priority than the DMZ host. In other words, if there has been created a virtual server that directs traffic from external port 80 to a port of the device from the router's local network, then entering http://router_WAN_IP in the address bar, users of the external network are directed to the specified port and IP address configured for the virtual server, but not to port 80 of the device with the IP address specified on the DMZ page. To disable the DMZ, deselect the Enabled checkbox and click the Change button.", "help_ex_menu_macfilter" : "On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers of the router\'s LAN. To specify a new address for the MAC filter, click the Add button. In the line displayed, you can specify the following parameters:

Parameter Description

MAC address

The MAC address of a device from the router\'s LAN. You can enter the MAC address of a device connected to the router\'s LAN at the moment. To do this, select the relevant device from the Known IP/MAC addresses вdrop-down list (the field will be filled in automatically).

Action

Select an action for the rule.

Deny: Blocks access to the router\'s network for the device with the specified MAC address.

Allow: Allows access to the router\'s network and to the Internet for the device with the specified MAC when the rules on the Firewall / IP filters page block access for this device.


After specifying the needed parameters, click the Apply button.
To edit a rule for filtering, select a needed field in the relevant line of the table, change its value, and click the Apply button.
To remove a rule for filtering, select the checkbox located to the left of the relevant line in the table and click the Apply button.
", "help_ex_menu_g3info" : "When a 3G modem is connected to the router, the following data are displayed on the page:
Parameter Description
Vendor The manufacturer of your 3G modem.
Model The alphanumeric code of the model of your 3G modem.
Revision The version of the firmware of your 3G modem.
IMEI International Mobile Equipment Identity. The code stored in the memory of the 3G modem.
Signal level The signal level at the input of the modem\'s receiver. The zero signal level shows that you are out of the coverage area of the operator\'s network.
", "help_menu_g3pin" : "Attention!
Operations presented on the page are available not for all models of 3G modems.
On the PIN page, you can change the PIN code of the identification card inserted to your 3G modem, disable or enable the check of the PIN code.", "help_ex_menu_g3pin" : "To disable the PIN code check, select the Disable PIN check checkbox, enter the current PIN code in the PIN code field and click the Change button.
To enable the PIN code check, deselect the Disable PIN check checkbox, enter the PIN code, used before disabling the check, in the PIN code field and click the Change button.
To change the PIN code, enable the PIN code check, enter the current code in the PIN code field, then enter a new code in New PIN code and New PIN code confirmation fields and click the Change button.
If upon one of the operations described above you have entered an incorrect value in the PIN code field three times (the number of remaining attempts is displayed in the Attempts left field), the identification card inserted into your 3G modem is blocked. For further use of the card, enter the PUK code in the relevant field, and then specify a new PIN code for your SIM card in the New PIN code and New PIN code confirmation fields. Click the Change button.", "help_ex_menu_wimaxinfo" : "The following fields and controls are available on the page:
Parameter Description
SSIDAn identifier for the WiMAX network. Specify the parameter if your WiMAX ISP requires this.
Diode on modemSelect the checkbox to enable the modem\'s LED indicator.
Link statusThe state of connection to the WiMAX network.
Red light: The connection is not established.
Yellow light: The 3G modem is connecting to the network.
Green light: The connection is established.
MAC address The MAC address of the WiMAX 3G modem.
RSSIThe signal level at the input of the modem\'s receiver.
CINR The relation of the signal level to the noise level. This parameter is used to measure the quality of the signal.
Base station ID The identifier of the base station.
Transmit power The signal level at the output of the modem\'s receiver.
Frequency The frequency of the signal transmitted by the modem\'s receiver.
Connect Click the button to connect to the WiMAX network. The button is displayed when the connection is not established.
DisconnectClick the button to disconnect from the WiMAX network. The button is displayed when the connection is established or is being established.
", "help_menu_urlfilter" : "On the URL filter page, you can specify restrictions on access to certain web sites.", "help_ex_menu_urlfilter" : "To enable the URL filter, select the Enable/Disable URL filter checkbox on the Configuration tab, then select a needed mode from the URL filter type drop-down list:Click the Change button.
To specify URL addresses to which the selected filtering will be applied, go to the URL addresses tab and click the Add button.
On the opened page, specify the needed parameters.
Enter a URL address in the URL address field and click the Save button.
To remove an address from the list of URL addresses, select the relevant address in the table on the URL addresses tab and click the Delete button.
To disable the URL filter, deselect the Enable/Disable URL filter checkbox on the Configuration tab, then click the Change button.", "help_ex_menu_system_passw" : "Attention!
For security reasons, it is strongly recommended to change the administrator password upon initial configuration of the router.
Enter the new password for access to the web-based interface of the router in the Password and Confirmation fields and click the Save button.", "help_menu_system_config" : "On the Configuration page, you can save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the router's configuration from a previously created file.", "help_ex_menu_system_config" : "The following buttons are available on the page:
ControlDescription
SaveClick the button to save settings to the non-volatile memory. Please, save settings every time you change the router's parameters. Otherwise the changes will be lost upon hardware reboot of the router.
FactoryClick the button to restore the factory default settings. Also you can restore the factory defaults via the hardware Reset button.
Backup Click the button and follow the dialog box appeared to save the configuration (all settings of the router) to your PC.
Restore Click the button to upload a previously saved configuration (all settings of the router) from a file on your PC.
Click the Choose/Browse button to select a previously saved configuration file located on your PC.
Actions of the Save, Factory, and Backup buttons also can be performed via the top-page menu displayed when the mouse pointer is over the System caption.", "help_ex_menu_system_log" : "To enable the logging function, select the Logging checkbox on the Configuration tab.
The system log is displayed on the Log tab.
To view the latest system events, click the Refresh button.
To save the system log to your PC, click the Export button and follow the dialog box appeared.", "help_ex_menu_system_firmware" : "To upgrade the firmware of the router, follow the next steps:
1. Download a new version of the firmware from www.dlink.ru.
2. Click the Choose/Browse button on the Firmware upgrade page to locate the new firmware file.
3. Click the Update button to upgrade the firmware of the router.
Attention!
Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown.", "help_ex_menu_system_firmware_rusterm" : "To upgrade the firmware of the router, follow the next steps:
1. Download a new version of the firmware.
2. Click the Choose/Browse button on the Firmware upgrade page to locate the new firmware file.
3. Click the Update button to upgrade the firmware of the router.
Attention!
Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown.", "help_ex_menu_ntp" : "To enable automatic synchronization with a time server:
1. select the Enabled checkbox
2. select your time zone
3. specify the needed NTP server in the Ntp servers field or leave the server specified by default
4. click the Change button.
Attention!
When the router is powered off or rebooted, the system time is reset to the default value. If you have set automatic synchronization for the system time, the internal clock of the device will be configured after connecting to the Internet.", "help_ex_menu_stat" : "On the Network statistics page, you can view statistics for all interfaces (connections) existing in the system.", "help_menu_statRoute" : "The Routing table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.", "help_ex_menu_statRoute" : "The Routing table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.", "help_menu_statLanClients" : "On the LAN clients page, you can view the list of devices connected to the router and devices accessing its web-based interface.
For each device the following data are displayed: the IP address, the MAC address, and the interface to which the device is connected.", "help_ex_menu_statLanClients" : "On the LAN clients page, you can view the list of devices connected to the router and devices accessing its web-based interface.
For each device the following data are displayed: the IP address, the MAC address, and the interface to which the device is connected.", "help_menu_statClients" : "On the Clients page, you can view the list of devices connected to the router and devices accessing its web-based interface.
For each device the following data are displayed: the IP address, the MAC address, and the interface to which the device is connected.", "help_ex_menu_statClients" : "On the Clients page, you can view the list of devices connected to the router and devices accessing its web-based interface.
For each device the following data are displayed: the IP address, the MAC address, and the interface to which the device is connected.", "help_ex_menu_rproxy" : "To start using the device, you need to connect to it.
To do this, select the needed device in the list and click the Connect button.
Pay attention to the State column. This prevents connection to an unavailable device.", "help_ex_menu_wifi_common" : "The Enable Wireless checkbox enables Wi-Fi connections. If you want to disable your WLAN, deselect the checkbox.
The router allows splitting your WLAN into several parts (up to four) with their own names (SSIDs) and unique identifiers (BSSIDs). To split the network into several parts, select a relevant value (2, 3, or 4) from the MBSSID drop-down list. By default, the wireless network is not spitted (the Disabled value is selected from the list).
The value from the BSSID drop-down list is the unique identifier for your Wi-Fi network. You cannot change the value of this parameter, it is determined in the router's internal settings.", "help_ex_menu_wifi_basic" : "
Parameter Description
Hide Access Point If the checkbox is selected, other users cannot see your Wi-Fi network. (It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN.)
SSID A name for the WLAN. It is recommended to specify another name for the network upon initial configuration (use digits and Latin characters).
Country The country you are in. Select a value from the drop-down list.
Channel The wireless channel number. When the auto value is selected, the router itself chooses the channel with the least interference.
Wireless mode Operating mode of the router's wireless network. This parameter defines standards of the devices that will be able to use your wireless network. Select a value from the drop-down list.
Max Associated Clients The maximum number of devices connected to the wireless network of the router. When the value 0 is specified, the router does not limit the number of connected clients.

When you have configured the parameters, click the Change button.", "help_ex_menu_wifi_security" : "By default, the Open network authentication type with no encryption is specified for the WLAN.
Attention!
The default security settings do not provide sufficient protection for the WLAN. Please, specify your own security settings for the WLAN (or each part of the WLAN if the network was splitted into parts).
The following authentication types are supported:
Authentication type Description
Open Open authentication (with or without WEP encryption).
Shared Shared key authentication with WEP encryption.
WEPAUTO A mixed type of authentication. When this value is selected, devices using the Open authentication type with enabled WEP encryption and devices using the Shared authentication type can connect to the router\'s WLAN.
WPA WPA-based authentication using a RADIUS server.
WPA-PSK WPA-based authentication using a PSK.
WPA2 WPA2-based authentication using a RADIUS server.
WPA2-PSK WPA2-based authentication using a PSK.
WPA/WPA2 mixed A mixed type of authentication. When this value is selected, devices using the WPA authentication type and devices using the WPA2 authentication type can connect to the router\'s WLAN.
WPA-PSK/WPA2-PSK mixed A mixed type of authentication. When this value is selected, devices using the WPA-PSK authentication type and devices using the WPA2-PSK authentication type can connect to the router\'s WLAN.
Attention!
The WPA, WPA2, and WPA/WPA2 mixed authentication types require a RADIUS server.
When the Open, Shared, or WEPAUTO value is selected, the following fields are displayed on the page:
Parameter Description
Enable Encryption WEP The checkbox activating WEP encryption. When the checkbox is selected, the Default Key ID field, the Encryption Key WEP as HEX checkbox, and four Encryption Key WEP fields are displayed on the page. For the Shared and WEPAUTO authentication types the checkbox is always selected.
Default Key ID The number of the key (from first to fourth) which will be used for WEP encryption.
Encryption Key WEP as HEX Select the checkbox to set a hexadecimal number as a key for encryption.
Encryption Key WEP (1-4) Keys for WEP encryption. The router uses the key selected from the Default Key ID drop-down list. It is required to specify all the fields.
You can specify keys containing 5 or 13 symbols (use digits and/or Latin characters). If the Encryption Key WEP as HEX checkbox is selected, you can specify only keys containing 10 symbols (the digits 0-9 and the characters A-F).
When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the following fields are displayed on the page:
Parameter Description
Encryption Key PSK A key for WPA encryption. The key can contain digits and/or Latin characters.
WPA2 Pre-authentication The checkbox activating preliminary authentication (displayed only for the WPA2-PSK and WPA-PSK/WPA2-PSK mixed authentication types).
WPA Encryption An encryption method: TKIP, AES, or TKIP+AES.
WPA renewal The time period (in seconds), at the end of which a new key for WPA encryption is generated. When the value 0 is specified for this field, the key is not renewed.
When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following fields are displayed on the page:
Parameter Description
WPA2 Pre-authentication The checkbox activating preliminary authentication (displayed only for the WPA2-PSK and WPA-PSK/WPA2-PSK mixed authentication types.
IP address The IP address of the RADIUS server.
Port A port of the RADIUS server.
RADIUS encryption key The password which the router uses for communication with the RADIUS server (the value of this parameter is specified in the RADIUS server settings).
WPA Encryption An encryption method: TKIP, AES, or TKIP+AES.
WPA renewal The time period (in seconds), at the end of which a new key for WPA encryption is generated. When the value 0 is specified for this field, the key is not renewed.

When you have configured the parameters, click the Change button.", "help_menu_ping" : "On the Ping page, you can check availability of a host from the local or global network via the Ping utility.", "help_ex_menu_ping" : "To check availability of a host, enter the IP address or name of this host in the Host field, and select a number of requests that will be sent in order to check its availability from the Count of packets drop-down list. Click the Ping button. The check results will be displayed in the Log field.
Also you can run the Ping function in the background mode. To do this, select the Background ping checkbox. Then enter the IP address or name of a host in the Host field and click the Ping button. When this mode is selected, the Count of packets and Log fields are not displayed.
In the background mode, the Ping utility sends requests to the host specified in the Host field every 40 seconds. The Background ping status light shows the status of the Ping function (green light: the function is running, red light: the function is not running).
To stop running the Ping function in the background mode, deselect the Background ping checkbox, enter the IP address or name of a host in the Host field, and click the Ping button.", "help_menu_storInfo" : "On the Information page, you can view data on the USB storage connected to the router.", "help_ex_menu_storInfo" : "The following data are presented on the page: the name, total and free space of the storage, and the type of its file system.
If the USB storage is divided into volumes, several values are displayed in the USB storage drop-down list. Select the needed value to view data on the volume (partition) of the USB storage.
To safely disconnect the USB storage, click the Unmount storage button. When the No value is displayed in the USB storage drop-down list, remove the storage from the router.
To disconnect one volume of the storage, select the needed value from the USB storage drop-down list and click the Unmount volume button.", "help_menu_fileBrowser" : "On the Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.", "help_ex_menu_fileBrowser" : "To view the content of the USB storage, click the link with the name of the storage or storage partition. The list of folders and files will be displayed on the page.
To proceed to a folder, select it in the directory structure on the left part of the page.
To remove a folder or file, click the delete link in the line corresponding to this folder or file.", "read_more" : "Read more", "incorrectFile" : "Incorrect file", "errorOnEdit" : "An error occurred while saving data!", "firmwareUploadTab" : "Update", "firmwareConfigTab" : "Settings", "firmwareConfigUrl" : "Source address", "firmwareUploadTab" : "Update", "firmwareConfigTab" : "Settings", "firmwareConfigUrl" : "Source address", "firmwareFileNotSelected" : "File not selected", "firmwareUpload" : "Select update file", "firmwareUploading" : "Loading, please wait...", "button_upload" : "Update", "firmware_invalid" : "Failed to update the firmware. The firmware file may be corrupted or in incorrect format.", "firmware_update" : "Firmware update", "firmware_titlemsg" : "The firmware of your device is being updated!", "firmware_shortmsg" : "Dear Customer! At the moment we are updating the firmware of your device. After update it will work more stable and efficient. Please do not power off the device before the firmware update is completed, this may cause a breakdown. Updating process will take no more than 5 minutes.", "autoupdNewVersion" : "An updated version of the firmware is available", "autoupdVersionNum" : "New firmware version", "dofwupdate" : "You are about to update the device’s firmware. Continue?", "button_upload_remote" : "Remote update", "remote_update" : "Remote update", "local_update" : "Local update", "remote_server_url" : "Remote server URL", "check_updates" : "Check for updates", "update_from_file" : "Update from file", "apply_fw_settings" : "Apply settings", "enable_auto_check" : "Check for updates automatically", "check_wait_warn" : "Checking for updates may take some time. Continue?", "fw_update_checking" : "Firmware update checking", "update_check_error" : "Failed to get data on the firmware update.", "update_avail_part1" : "Firmware update is available. Version is \"", "update_avail_part2" : "\". Start update now?", "new_version_unavailable" : "At this time, the device works with the latest version of the software", "autoupdFileAbsent" : "Firmware update file is absent on remote server", "autoupdUnknownError" : "It is unable to perform check for a new firmware version", "uploadFileNotSelected" : "File not selected", "button_browse" : "Browse", "button_next" : "Next >", "button_prev" : "< Back", "button_cancel" : "Cancel", "button_finish" : "Finish", "devInfoTestVers" : "Test release. Not for distribution. No end user support.", "devInfoPromVers" : "This firmware may have limited functionality and must be upgraded to next version as fast as possible.", "menu_master_conns" : "Connection wizard", "button_recheck" : "Recheck", "checkcable" : "Checking the cable", "connstat" : "Connection status", "hostaccess" : "Checking the host availability", "cablenotplugged" : "the cable is not plugged", "accessible" : "available", "unaccessible" : "unavailable", "wandownmes" : "Failed to establish the connection", "wanconnectingmes" : "The connection is not yet established.", "wanconnectingmes2" : "May be not enough time to establish the connection. Wait for several minutes and click the Recheck button. If this does not help, you may have made errors when entering the connection parameters or there may exist a problem on the ISP’s side.", "wancreatefailure" : "Failed to create the connection, please, try to follow the Wizard again. If failed again, contact the technical support service.", "checkwantitle" : "Checking the Internet availability with the ping utility", "checkwanhost" : "Address", "checkwanresult" : "Result", "inetok" : "Congratulations! You are successfully connected to the Internet.", "inetfail" : "The specified host is not available.", "pingfail" : "The reason may be the host itself. Specify another popular URL, for example, google.com or dlink.com. If this does not help, then incorrect connection parameters are specified or there exists a problem on the ISP’s side.", "pingfailbridge" : "The reason may be that if the Bridge connection type is used, the Internet is usually accessed via a PPPoE connection configured on the PC.", "quickInfoDSL3" : "Please make sure that the DSL LED is on. If the cable is connected correctly, but the LED is off, your line may be not connected to the ISP’s equipment. If the LED is blinking, DSL is still being synchronized. Wait for several minutes and check again.", "wandismes" : "The connection is forbidden", "wancablewarn" : "The cable is not connected. You can continue configuring access to the Internet, but the connection will be established after the cable is connected. Continue?", "quickInfoDSL1" : "Connect the microfilter/splitter (delivered for some models) to the telephone socket. Use the gray cable to connect the DSL port of the device to the DSL port of the microfilter/splitter.", "quickInfoDSL2" : "Please make sure that the DSL light is lit before clicking Next", "quickInfoEth1" : "Connect the ISP’s Ethernet cable to the WAN (Internet) port of the device.", "quickInfoEth2" : "Please make sure that the WAN light is lit before clicking Next", "wzwifiSaveOk" : "Wi-Fi setup complete!", "wzwifiDone" : "You can complete the master!", "menu_master_virtual" : "Host site wizard", "wzwifiSaveOk" : "Wi-Fi setup complete!", "wzwifiDone" : "You can complete the master!", "menu_master_wifi" : "Configuration Wizard Wi-Fi", "basicChannel" : "Channel", "basicChannelWorkload" : "Workload", "clientMasterSameSecurity" : "Use the same security and network key as those for the exiting network", "clientMasterSectAccessKey" : "Enter security key to establish connection", "clientMasterSectRepeater" : "Enter the settings for the extender network", "clientMasterSectSummary" : "Keep a note of the following settings for future reference", "clientMasterSecurityKey" : "Network key", "securityAuthMode" : "Network Authentication", "securityWPAEnc" : "WPA Encryption", "wifiPSKKeyWrong" : "WPA Pre-Shared Key should be between 8 and 63 ASCII characters.", "wifiWEPKeyWrong" : "Encryption key should contain 5 or 13 characters. Empty key is not allowed!", "wzwifiMode" : "Mode", "wzwifiRouter" : "Access point", "wzwifiHotspot" : "Hotspot", "wzwifiYes" : "Yes", "wzwifiAtt" : "Attention", "wzwifiOpen" : "Open", "wzwifiClose" : "Protected", "wzwifiNo" : "[Not required]", "wzwifiDescSSID" : "Enter the name of the access point", "wzwifiDescSecurity" : "Specify the security mode", "wzwifiAttWAN" : "To access the Internet, please also configure a WAN connection!", "wzwifiDisable" : "Turn off", "wzwifiDisableWiFi" : "Disable the wireless network", "wzwifiGenMode" : "Select an operating mode for the wireless network", "wzwifiDescRouter" : "Select this item if you want to connect a portable device (a laptop, smartphone, etc.) to the Internet via wireless connection (Wi-Fi)", "wzwifiDescDisable" : "Select this item if you are not going to use devices which require wireless connection", "wzwifiSaveOk" : "Wi-Fi setup complete!", "wzwifiNeedReboot" : "The changes will be applied after the reboot of the device!", "wzwifiRebooting" : "You can reboot the device immediately or reboot it later.", "wzwifiReboot" : "Reboot?", "wzwifiDone" : "You can complete the master!", "wzVSSaveOk" : "Virtual server setup complete!", "wzwifiDone" : "You can complete the master!", "menu_master_virtual" : "Host site wizard", "wzwifiSaveOk" : "Wi-Fi setup complete!", "wzwifiDone" : "You can complete the master!", "menu_master_wifi" : "Configuration Wizard Wi-Fi", "menu_telnet" : "Telnet", "telnetOn" : "On", "telnetPort" : "Port", "help_menu_telnet" : "On the Telnet page, you can enable or disable access to the device settings via TELNET from your LAN.", "help_ex_menu_telnet" : "To enable access via TELNET, select the On checkbox. In the Port field, enter the number of the router's port through which access will be allowed (by default, the port 23 is specified). Then click the Change button.
To disable access via TELNET, deselect the On checkbox and click the Change button.", "telnetLabel" : "Telnet configuration", "greeting_part1" : "You have connected to the web-based interface of the", "greeting_part2" : "device; now, you can do the following:", "wzbutton_inet" : "Connect to internet", "title_inet" : "Internet connection wizard", "wzbutton_virtual" : "Host site", "title_virtual" : "Virtual server settings wizard", "wzbutton_wifi" : "Configure Wi-Fi", "wzbutton_iptv" : "Configure IPTV", "iptv_master_comment" : "If your ISP provides a service to IPTV, you can connect a set-top box directly to the router, without using additional equipment. To do this, check the checkbox corresponding to any LAN-port and then connect to the port your TV-top box.

For example: If you chose the 1st port of the router, then the prefix to connect to the port LAN1.

Notice : a computer connected to a dedicated port, will not have access to the Internet.

", "wzwifiSaveOk" : "Wi-Fi setup complete!", "wzIPTVSaveOk" : "IP TV setup complete!", "wzwifiNeedReboot" : "The changes will be applied after the reboot of the device!", "wzwifiRebooting" : "You can reboot the device immediately or reboot it later.", "wzwifiReboot" : "Reboot?", "wzwifiSaveOk" : "Wi-Fi setup complete!", "wzwifiDone" : "You can complete the master!", "title_iptv" : "IPTV settings wizard", "wzIPTVSaveOk" : "IP TV setup complete!", "title_wifi" : "Wireless network settings wizard", "wzbutton_hends" : "Configure manually", "wzbutton_exitb" : "Logout", "new_" : "new", "advanced" : "Advanced settings", "menu_click_n_Connect" : "Click\'n\'connect", "quickWiFiSave" : "Applying Wi-Fi configuration. Please wait", "quickSaveConfirm" : "Click Apply to confirm the settings!", "quickComplite" : "Setup is complete!", "quickCompleting" : "Completing", "quickIPTVSave" : "Applying IPTV configuration. Please wait", "button_skip" : "Skip to next", "quickDescIPtv" : "If you are not going to use IP TV, click \"Skip to next\".", "quickDescWiFi" : "If you want to connect a portable device (laptop, smartphone, etc.) to the Internet via wireless connection (Wi-Fi), then specify an individual name for the access point (SSID) and a password (encryption key). If you are not going to use devices which require wireless connection, click \"Skip to next\".", "quickInfoDSL1" : "Connect the microfilter/splitter (delivered for some models) to the telephone socket. Use the gray cable to connect the DSL port of the device to the DSL port of the microfilter/splitter.", "quickInfoDSL2" : "Please make sure that the DSL light is lit before clicking Next", "quickInfoDSL3" : "Please make sure that the DSL LED is on. If the cable is connected correctly, but the LED is off, your line may be not connected to the ISP’s equipment. If the LED is blinking, DSL is still being synchronized. Wait for several minutes and check again.", "quickInfoEth1" : "Connect the ISP’s Ethernet cable to the WAN (Internet) port of the device.", "quickInfoEth2" : "Please make sure that the WAN light is lit before clicking Next", "quickInfoFiber1" : "Connect the ISP’s fiber cable to the SFP port of the device.", "quickInfoFiber2" : "Please make sure that the SFP light is lit before clicking Next", "button_recheck" : "Recheck", "checkcable" : "Checking the cable", "checkusb" : "Checking 3G modem", "connstat" : "Connection status", "hostaccess" : "Checking the host availability", "cablenotplugged" : "the cable is not plugged", "accessible" : "available", "unaccessible" : "unavailable", "wandownmes" : "Failed to establish the connection", "wanconnectingmes" : "The connection is not yet established.", "wanconnectingmes2" : "May be not enough time to establish the connection. Wait for several minutes and click the Recheck button. If this does not help, you may have made errors when entering the connection parameters or there may exist a problem on the ISP’s side.", "wancreatefailure" : "Failed to create the connection, please, try to follow the Wizard again. If failed again, contact the technical support service.", "checkwantitle" : "Checking the Internet availability with the ping utility", "checkwanhost" : "Address", "checkwanresult" : "Result", "inetok" : "Congratulations! You are successfully connected to the Internet.", "inetfail" : "The specified host is not available.", "pingfail" : "The reason may be the host itself. Specify another popular URL, for example, google.com or dlink.com. If this does not help, then incorrect connection parameters are specified or there exists a problem on the ISP’s side.", "pingfailbridge" : "The reason may be that if the Bridge connection type is used, the Internet is usually accessed via a PPPoE connection configured on the PC.", "wandismes" : "The connection is forbidden", "wancablewarn" : "The cable is not connected. You can continue configuring access to the Internet, but the connection will be established after the cable is connected. Continue?", "dialogClose" : "Cancel", "maybe_lang" : "Maybe your language is", "umount_usb" : "Unmount USB-storage", "search_results" : "Search results for", "search_empty" : "Nothing was found", "clear_notifications" : "Clear all notifications", "empty_notifications" : "Nothing", "rollup_notifications" : "Collapse notifications", "short_on" : "On", "short_off" : "Off", "back_to_settings" : "Back to settings", "quick_search" : "Quick search", "proxy" : "Proxy", "proxy_auto" : "Auto", "proxy_list" : "Device list", "idle" : "Idle", "menu_iptv" : "IP-tv", "netInfo" : "Network information", "quickSettings" : "Quick settings", "exSettings" : "Advanced settings", "search" : "Search", "help_none" : "For these settings, there is no documentation", "button_revert" : "Revert", "button_enable" : "Enable", "button_disable" : "Disable", "button_start" : "Start", "autherror" : "Authorization error", "ipaddr" : "IP address", "apply" : "Apply", "cableplugged" : "the cable is plugged", "fieldEmpty" : "A mandatory field is not filled", "edit_or_esc" : "Get back to editing?", "domainNameInvalid" : "Invalid domain name", "cloneMACTip" : "Clone MAC address of your computer", "confirm_savereboot" : "All changes will be saved and system will be rebooted! Continue?", "ACCEPT" : "ACCEPT", "DROP" : "DROP", "dialogClose" : "Cancel", "updatePage" : "Update page", "error" : "Error", "pleaseWait" : "Please wait...", "updatePage" : "Update page", "error" : "Error", "save_fields_rq" : "Are you sure you want to save changes on the page?", "reset_fields_rq" : "Are you sure you want to reset changes on the page?", "button_reset" : "Reset", "fwarning" : "Firmware update and device reboot is in progress. Please do not power the device off. After reboot the page of the browser will be refreshed automatically.", "rejectDelCon0" : "As a result of your actions was an attempt to remove one or more connections, which is used in", "rejectDelCon2" : "You can not remove them", "rejectDelCon3" : "Go to the page?", "passChanged" : "Password changed", "srcEmpty" : "Start IP range is not filled", "rpcWriteError" : "Data saving error", "rpcReadError" : "Data receiving error" };